Hioki IM3536
| Attribute | Value |
|---|---|
| Frequency Range | 4 Hz to 8 MHz |
| Measurement Parameters | Z, Y, θ, Rs, Rp, X, G, B, Cs, Cp, Ls, Lp, D, Q, Δ%, DCR |
| Basic Accuracy | 0.05% |
| Test Signal Level (Voltage) | 10 mV to 5 V RMS |
| Test Signal Level (Current) | 10 μA to 100 mA RMS |
| Measurement Range | 1 mΩ to 100 MΩ |
| Display | 4.3-inch color TFT LCD |
| Interface | USB, LAN, GP-IB (optional), RS-232C (optional), Handler |
| Measurement Speed | Fast: approx. 1.5 ms (at 1 MHz), Slow: approx. 625 ms (at 4 Hz) |
| DC Bias | Internal: 0 V to ±2.5 V DC; External: 0 V to ±40 V DC (with external bias unit) |
Hioki IM3536 Options:
- IM3536 - 9637 - RS-232C CABLE, For the PC, 9pin - 9pin, cross, 1.8m (5.91 ft) length
- IM3536 - 9151-02 - GP-IB CONNECTOR CABLE, 2 m (6.56 ft) length
- IM3536 - 9268-10 - DC BIAS VOLTAGE UNIT, Measurement frequency range: 40 Hz to 8 MHz, Maximum applied voltage: ±40 V DC
- IM3536 - 9269-10 - DC BIAS CURRENT UNIT, Measurement frequency range: 40 Hz to 2 MHz, Maximum applied current: 2 A DC
- IM3536 - L2000 - 4-TERMINAL PROBE, Measurable range: DC to 8 MHz, Measurable terminal diameter: 0.3 mm to 5 mm, Cord length: 1 m
- IM3536 - 9140-10 - 4-TERMINAL PROBE, Measurable range: DC to 200 kHz, Measurable terminal diameter: 0.3 mm to 5 mm, Cord length: 1 m
- IM3536 - 9500-10 - 4-TERMINAL PROBE, Measurable range: DC to 200 kHz, Measurable terminal diameter: 0.3 mm to 2 mm, Cord length: 1 m
- IM3536 - 9262 - TEST FIXTURE, Measurable range: DC to 8 MHz, Measurable terminal diameter: 0.3 mm to 2 mm, Direct connection type
- IM3536 - 9261-10 - TEST FIXTURE, Measurable range: DC to 8 MHz, Measurable terminal diameter: 0.3 mm to 1.5 mm, Cord length: 1 m
- IM3536 - 9263 - SMD TEST FIXTURE, Measurable range: DC to 8 MHz, For SMD with electrodes on side, Measurable sample sizes: 0805 to 2220 (EIA) / 2012 to 5750 (JIS), Direct connection type
- IM3536 - 9677 - SMD TEST FIXTURE, Measurable range: DC to 120 MHz, For SMD with electrodes on side, Measurable sample sizes: 0402 to 0603 (EIA) / 1005 to 1608 (JIS), Direct connection type
- IM3536 - 9699 - SMD TEST FIXTURE, Measurable range: DC to 120 MHz, For SMD with electrodes on bottom, Measurable sample sizes: 0608 to 0805 (EIA) / 1608 to 2012 (JIS), Direct connection type
- IM3536 - IM9100 - SMD TEST FIXTURE, Measurable range: DC to 8 MHz, For SMD with electrodes on bottom, Measurable sample sizes: 01005 to 0402 (EIA) / 0402 to 1005 (JIS), Direct connection type
- IM3536 - IM9110 - SMD TEST FIXTURE, Measurable range: DC to 1 MHz, For SMD with electrodes on side, Measurable sample sizes: 008004 (EIA) / 0201 (JIS), Direct connection type
- IM3536 - L2001 - PINCHER PROBE, Measurable range: DC to 8 MHz, Replaceable tips, Cord length: Approx. 730 mm, Ships standard with one set of IM9901
- IM3536 - IM9901 - CONTACT TIPS for L2001, Measurable sample sizes: 0603 to 2220 (EIA) / 1608 to 5750 (JIS)
- IM3536 - IM9902 - CONTACT TIPS for L2001, Measurable sample sizes: 0201 to 2220 (EIA) / 0603 to 5750 (JIS)
| Model | IM3536 |
|---|
The Hioki IM3536 is a high-performance LCR meter featuring a wide DC and 4 Hz to 8 MHz frequency range with 0.05% accuracy. It supports testing of next-generation electronic components including power supply inductors, and offers a guaranteed accuracy range starting at 1 MΩ. The unit can store up to 32,000 results, transfer data via USB, and allows spreadsheet analysis for precise evaluation.
With enhanced residual charge protection, the IM3536 ensures safety against capacitor discharge, making it ideal for applications such as low-ESR electrolytic capacitor measurement and coil impedance testing. Its cost-effective design suits both R&D and production lines where diverse measurement conditions are required.
Testwall can supply the used Hioki IM3536 LCR Meter, fully tested. With expert support and global delivery, Testwall ensures high-performance instrumentation with unmatched reliability and service quality. Please contact us directly if you need calibration or repair of the Hioki IM3536 LCR Meter.
