Ceyear
Ceyear 3672C
10MHz - 40GHz Network Analyser
Da 10 MHz a 26,5 GHz Gamma di frequenza
Da +13 dBm a -10 dBm (tipico) Livello di potenza di uscita
Armoniche inferiori a -30 dBc Purezza spettrale
1 Hz Risoluzione di frequenza
-110 dBc/Hz a 10 kHz di offset (a 1 GHz) Rumore di fase
| Attributo | Valore |
|---|---|
| Gamma di frequenza | Da 10 MHz a 26,5 GHz |
| Livello di potenza di uscita | Da +13 dBm a -10 dBm (tipico) |
| Purezza spettrale | Armoniche inferiori a -30 dBc |
| Risoluzione di frequenza | 1 Hz |
| Rumore di fase | -110 dBc/Hz a 10 kHz di offset (a 1 GHz) |
| Numero di porte | 2 porte (analizzatore di rete vettoriale) |
| Dinamica di misura | Fino a 130 dB |
| Connettore RF | 2,92 mm (femmina), compatibile con connettori SMA e 3,5 mm |
| Interfacce di comunicazione | USB, LAN (Ethernet), GPIB |
| Alimentazione | 100-240 V CA, 50/60 Hz |
Ceyear 3672C Options:
- 3672C - 201 - 2-Port Programmable Step Attenuator: Set two 60dB programmable step attenuators for the source path, and two 35dB programmable step attenuators for the receiver path
- 3672C - 400 - 4-Port Measurement: Two-source stimulus four-port VNA configuration
- 3672C - 401 - 4-Port Programmable Step Attenuator: Set four 60dB programmable step attenuators for the source path, and four 35dB programmable step attenuators for the receiver path (Option 400 is needed)
- 3672C - 402 - Active Inter-modulation Measurement: For inter-modulation signal measurement of amplifier (Option 400 is needed)
- 3672C - 006 - English Options: Key, Front Panel, Label, Operation System
- 3672C - 008 - Pulse Measurement: For pulse S-parameter measurement
- 3672C - S10 - Time Domain Measurement: For time-domain test, can locate and analyze the discontinuous positions in devices, fixtures or cables
- 3672C - S80 - Frequency Offset Measurement: For frequency offset measurement; millimeter-wave frequency extension main unit needs this option
- 3672C - S82 - Mixer Scalar Measurement: For the scalar parameter measurement of mixers (Option 400 is needed)
- 3672C - S83 - Mixer Vector Measurement: For the vector parameter measurement of mixers (Option 400 is needed)
- 3672C - S84 - Embedded LO Frequency Converter Measurement: For the measurement of embedded LO frequency converters (Option 400, S82 or S83 are needed)
- 3672C - S86 - Gain Compression Two-Dimension Sweep Measurement: For the gain compression two-dimension sweep test of amplifier
| Model | 3672C |
|---|
Product Overview
3672*-S series vector network analyzer is consist of 3672A-S(10MHz~13.5GHz), 3672B-S(10MHz~26.5GHz)and 3672C-S(10MHz~43.5GHz). 3672*-S series reduces cost and enhances price-performance ratio but still maintains the same critical technical specifications with those of high performance instrument, such as sweep speed, dynamic range etc. 3672*-S series offers multiple calibration types including frequency response, single port, response isolation, enhanced response, full dual-port and E-cal. Multiple display types are embedded like logarithm amplitude, linear amplitude, standing-we, phase, group delay, Smith chart, polar coordinates. Many standard interfaces are ailable including USB, LAN, GPIB, VGA etc. They can precisely measure characteristics of amplitude-frequency, phase-frequency, and group delay and so on.
Main Features
1. Flexible calibration types, compatible with multiple calibration kits
2. Support complicated testing solutions with many windows, multiple channels and fast operation
3. Multiple display types like logarithm amplitude, linear amplitude, standing-we ratio, Smith chart etc
4. With USB, GPIB, LAN and VGA display interface
5. Chinese/English operation interfaces, 12.1 inch 1280*800 high-resolution multi-point touch screen
6. Record/Run, one-button operation simplifies measurement setup and improves working efficiency
