Sorensen
Sorensen XPF60-20D
Dual Output DC Power Supply, (2x)60V,20A, 420W
60 V Tensione di uscita massima
20 A Corrente di uscita massima
1200 W Potenza massima
Doppia uscita (Dual Output) Numero di uscite
≤ 0,01% + 2 mV Regolazione della tensione (linea/carico)
| Attributo | Valore |
|---|---|
| Tensione di uscita massima | 60 V |
| Corrente di uscita massima | 20 A |
| Potenza massima | 1200 W |
| Numero di uscite | Doppia uscita (Dual Output) |
| Regolazione della tensione (linea/carico) | ≤ 0,01% + 2 mV |
| Regolazione della corrente (linea/carico) | ≤ 0,01% + 2 mA |
| Ondulazione e rumore (tensione) | ≤ 1 mV rms / 5 mV picco-picco |
| Interfacce di comunicazione | USB, RS-232, GPIB (opzionale) |
| Tensione di ingresso (alimentazione) | 100 – 240 V CA, 50/60 Hz |
| Display | Display digitale a 4 cifre per tensione e corrente |
| Model | XPF60-20D |
|---|
SORENSEN XPF60-20D Dual Output DC Power Supply The Sorenson XPF60-20D DC Power Supply is a diffe type of laboratory power supply designed to meet the need for flexibility in the choice of voltage and cur. The PowerFlex design of the XPF series enables higher curs to be generated at lower voltages within an overall power limit envelope. Each output can provide considerably higher cur than a conventional power supply of the same maximum voltage and power. The XPF60-20DP incorporates S-Lock. One press of the Lock button transfers control of voltage and cur from the analog controls to internal digital circuitry. This offers not just complete security, but exceptional stability as well with each setting controlled by an instrumentation quality DAC.The two outputs of the Sorensen XPF60-20D are completely independent and electrically isolated from each other. With V-Track selected, the two outputs remain electrically isolated, but the voltage control of the Master output sets an identical voltage on the Slave output. This enables the user to create two rails of either polarity and to reference them to diffe grounds if necessary (e.g. digital ground and analog ground). Alternatively the outputs can be wired in series or parallel to create a voltage capability up to 120V or a cur capability up to 40A with the voltage set using a single control. To meet the varying needs of today’s engineers, a comprehensive array of interfaces is provided. RS-232, USB, GPIB and LAN (Ethernet) with LXI support are provided as standard. Specifications for the SORENSEN XPF60-20D Dual Output DC Power Supply Include:
