Manufacturer Logo
Keysight (Agilent)

Keysight (Agilent) E5058A

SSA-X Signal Source Analyzer, 1 MHz - 54 GHz
10 MHz to 3 GHz Frequency Range
Phase Noise, Residual Phase Noise, AM Noise, Frequency, Power Measurement Parameters
Up to -183 dBc/Hz (at 10 kHz offset, 1 GHz carrier) Dynamic Range
-20 dBm to +30 dBm Input Power Range
1 Hz to 100 MHz Offset Frequency Range
Request datasheet
Attribute Value
Frequency Range 10 MHz to 3 GHz
Measurement Parameters Phase Noise, Residual Phase Noise, AM Noise, Frequency, Power
Dynamic Range Up to -183 dBc/Hz (at 10 kHz offset, 1 GHz carrier)
Input Power Range -20 dBm to +30 dBm
Offset Frequency Range 1 Hz to 100 MHz
Number of Test Ports 4 Signal Input Ports
Reference Input 10 MHz External Reference Input
Interface/Connectivity LAN (LXI), USB, GPIB
Display 10.4-inch Color LCD Touch Screen
Power Requirements 100–240 VAC, 50/60 Hz, 300 W Maximum
Keysight (Agilent) E5058A Options:
  • 1-port or 2-port configuration (2-port adds vector network analysis)
  • Standard or enhanced low phase noise configuration
  • GPIB interface
  • Core software (mandatory) - phase noise, AM noise and baseband noise measurements
  • Advanced features - cross-correlation 2 to 100,000, transient measurements, VCO characterization, spectrum monitor
  • Full-span spectrum analysis
  • S96302B - Precision jitter analysis
  • S96325B - Pulsed-RF AM/PM noise measurements
Calibration Form Keysight (Agilent) E5058A

Repair Form Keysight (Agilent) E5058A
Maximum file size: 40MB

Keysight (Agilent) E5058A SSA-X Signal Source Analyzer, 1 MHz to 54 GHz

The Keysight E5058A is a member of the SSA-X signal source analyzer family, extending the platform introduced with the E5055A to 54 GHz. It is a bench-top phase noise and signal source analyzer for wireless communications, radar, aerospace and defense and high-speed digital applications, offering a frequency range of 1 MHz to 54 GHz, phase noise offset frequencies from 0.01 Hz to more than 1 GHz, and phase noise sensitivity of -171 dBc/Hz (typical, 16 GHz carrier, 1 MHz offset).

An ultra-low noise floor and the cross-correlation method give accurate, repeatable phase noise measurements, while flexible measurement settings and a modern touch-screen user interface improve throughput. A built-in clean internal source with path-delay compensation supports residual (additive) phase noise measurements, and two clean DC voltage channels plus tuning voltage outputs make VCO characterisation straightforward. Measurements above 54 GHz are supported with external mixers. Optional capabilities include a 2-port VNA, S96302B precision jitter analysis and compatibility with E5001A SSA-J software.

Specifications for the Keysight (Agilent) E5058A Signal Source Analyzer include:

Frequency Range1 MHz to 54 GHz
Offset Frequency Range0.01 Hz to >1 GHz
Input Power Range-50 dBm to +20 dBm (typ.)
Phase Noise Sensitivity-171 dBc/Hz at 16 GHz, 1 MHz offset (typ.)
Measurement MethodCross-correlation, with internal reference source
DC Outputs2 x clean DC supply plus tuning voltage outputs

Image shows the E5055A; the E5058A shares the same SSA-X chassis.

Clicky
Copyright © 2025-present Magento, Inc. All rights reserved.