Keysight (Agilent) N5241A
| Attribute | Value |
|---|---|
| Frequency Range | 10 MHz to 13.5 GHz |
| Number of Ports | 4 |
| Dynamic Range | Up to 123 dB |
| Output Power Range | -85 dBm to +10 dBm |
| Trace Noise | 0.004 dB RMS |
| Test Port Connector Type | 3.5 mm (f) |
| Measurement Speed | Up to 40 µs per point |
| System Interface | GPIB, USB, LAN (LXI Class C Compliant) |
| Number of Independent Signal Sources | 4 |
| Operating Temperature Range | 0°C to 55°C |
Keysight (Agilent) N5241A Options:
- N5241A - 029 - Adds hardware and firmware for high-accuracy noise figure measurements (requires one of option 219, 224, 419, or 423)
- N5241A - 200 - 2-port standard test set (includes six front-panel access loops) and power range
- N5241A - 219 - Adds 2-port extended power range, source and receiver attenuators, and bias-tees (requires Option 200)
- N5241A - 224 - Adds an internal second source, a combiner, and mechanical switches to the 2-port analyzer (requires Option 200, 219, and 080)
- N5241A - 400 - 4-port standard test set (includes twelve front-panel access loops), power range, and an internal second source (Option 080 recommended)
- N5241A - 419 - Adds 4-port extended power range, source and receiver attenuators, and bias-tees (requires Option 400)
- N5241A - 423 - Adds an internal combiner, and mechanical switches to the 4-port analyzer (requires Option 400, 419, and 080)
| Model | N5241A |
|---|
The Keysight (Agilent) N5241A Network Analyzer offers exceptional configurability and precision, supporting frequencies from 10 MHz to 13.5 GHz with 2 or 4 ports and two built-in sources. It includes a second source, combiner, and internal signal-routing switches, delivering a high output power of +18 dBm, low harmonics of -60 dBc, and a 38 dB power sweep range. The device supports 32,001 points and 32 channels, offering a 132 dB system dynamic range and a low noise floor of -114 dBm at 10 Hz IF bandwidth.
Ideal for testing amplifiers, mixers, converters, and antennas, this analyzer ensures accurate performance with 0.1 dB compression at +13 dBm input power and a wide frequency range, supporting your specific device needs.
Testwall can supply the used Keysight (Agilent) N5241A, fully tested. With expert support and global delivery, Testwall ensures high-performance instrumentation with unmatched reliability and service quality. Please contact us directly if you need calibration or repair of the Keysight (Agilent) N5241A.
