Keysight (Agilent) E7403A
| Attribute | Value |
|---|---|
| Frequency Range | 100 Hz to 26.5 GHz |
| Displayed Average Noise Level (DANL) | -155 dBm (with preamp enabled, 1 GHz) |
| Phase Noise | -114 dBc/Hz at 10 kHz offset (1 GHz carrier) |
| Amplitude Accuracy | ±0.54 dB total amplitude accuracy |
| Dynamic Range | Third-order intermodulation distortion (TOI): +18 dBm |
| Resolution Bandwidth (RBW) | 1 Hz to 8 MHz (in 10% steps), plus 5 MHz and 8 MHz |
| Input Impedance | 50 Ohms |
| Maximum Input Power | +30 dBm (1 W) average continuous power |
| Sweep Time | 1 ms to 2000 s (span > 0 Hz) |
| Display | 10.4-inch color LCD, 640 x 480 resolution (VGA) |
| Model | E7403A |
|---|
The Keysight (Agilent) E7403A EMC Analyzer is designed for in-house EMI precompliance testing, with features like automatic EMI measurements, log sweep, a built-in preamplifier, and an optional tracking generator. It includes a 3.5'' disk drive, 5-minute warm-up, and a rugged, portable design compatible with BenchLink Web Remote software.
Used with a broadband antenna or LISN device, it detects both radiated and conducted emissions. Close field probes enable precise diagnostics and problem isolation.
Testwall can supply the used Keysight (Agilent) E7403A, fully tested. With expert support and global delivery, Testwall ensures high-performance instrumentation with unmatched reliability and service quality. Please contact us directly if you need calibration or repair of the Keysight (Agilent) E7403A.
