Keysight (Agilent) E8363C
| Attribute | Value |
|---|---|
| Frequency Range | 10 MHz to 40 GHz |
| Number of Ports | 2-port Vector Network Analyzer |
| Dynamic Range | Up to 118 dB |
| Output Power Range | -85 dBm to +10 dBm |
| Trace Noise | 0.004 dB RMS at 10 Hz IF bandwidth |
| Connector Type | 2.4 mm (f) test port connectors |
| IF Bandwidth | 1 Hz to 40 kHz |
| Power Accuracy | ±0.5 dB |
| Number of Data Points | 1 to 32,001 points per sweep |
| Interface/Connectivity | GPIB, LAN (10Base-T/100Base-TX), USB |
Keysight (Agilent) E8363C Options:
Options available for the Keysight (Agilent) PNA series microwave network analyzers (E8361/E8362/E8363/E8364). Installed options vary from unit to unit – ask us for the exact configuration of the instrument you are interested in.
- E8363C - 010 - Time-domain measurements
- E8363C - 014 - Configurable test set (front-panel access loops)
- E8363C - UNL - Extended power range and bias-tees
- E8363C - 016 - Receiver attenuators
- E8363C - 080 - Frequency-offset mode
- E8363C - 081 - Reference receiver switch
- E8363C - 082 - Scalar-calibrated converter measurements
- E8363C - 083 - Frequency converter application with vector-calibrated measurements
- E8363C - H08 - Pulsed-RF measurement capability
- E8363C - H11 - IF access
- E8363C - 1CM - Rack mount kit
- E8363C - 1CP - Rack mount kit with handles
The Keysight (Agilent) E8363C Network Analyzer operates from 10 MHz to 40 GHz with exceptional 110 dB dynamic range and trace noise less than 0.006 dB, providing high-precision measurements across 32 channels with 20,001 points. Measurement speeds reach <26 µs/point, enabling real-time analysis.
Supporting TRL/LRM calibration, the unit performs comprehensive testing including mixer conversion and amplifier compression, suitable for on-wafer, in-fixture, and antenna scenarios.
Testwall can supply the used Keysight (Agilent) E8363C, fully tested. With expert support and global delivery, Testwall ensures high-performance instrumentation with unmatched reliability and service quality. Please contact us directly if you need calibration or repair of the Keysight (Agilent) E8363C.
