QUADTECH GUARDIAN 6100 PLUS
Features functional & safety testing in one box
Simultaneous Hipot and Ground Bond Testing
Seamlessly integrated into an ATE environment
High voltage / high cur scanner options for multi-point testing
Archive test setups, data and results with CaptivATE Automation Software
Programmable AC Hipot Voltage 50 to 5000 VAC, Output Cur to 40 mA
Programmable DC Hipot Voltage 50 to 6000 VDC, Output Cur to 12 mA
IR Measurements from 100 kohm to 50 Gohm, Test Voltage 50 to 1000 VDC
Programmable Ground Bond Cur from 1 to 40 A, R Measurement to 510mohms
Twin-Port – Simultaneous Hipot and Ground Bond
Built-in 20 A Hipot / Line Leakage Scanner
Functional Run Testing: Voltage (to 300 V), Cur (to 20 A) or Power (to 4400 VA)
Earth, Enclosure, Patient & Patient Auxiliary Leakage Cur Measurements
Open / Short Circuit Detection to ensure DUT is connected
Pause Mode Allows the Operator to Change Device Connection and Continue
Programmable Hi / Lo Limits for Pass / Fail Testing
Programmable Ramp, Dwell and Test Times
Perform Multiple Tests in Sequence with Store / Recall of 100 Setups, 50 Steps Each
Front Panel Lockout Prevents Changes to the Test Setup
Automatic Offset to Zero Out Residual Cur
Fast HV Cutoff and Quick Discharge of Device Under Test
RS-232 and I/O Interfaces Included Standard
IEEE-488 and Printer Interfaces Optional
Built In Operator Prompted Software Calibration Routine
Front and Rear Panel Output Connections
40 A Ground Bond Testing with Optional Transformer
CaptivATE Automation Software for GUARDIAN 6100 Plus (Optional)
CE, TUV & UL Marked
GB: Standard 30A output, Optional 40A output