Home » Shop » Used » DC & AC Power Supplies » DC Power Supply » Sorensen SGA800-37.5

Sorensen SGA800-37.5

DC Power Supply, 800V, 37.5A, 30kW

Manufacturer:
Model: Sorensen SGA800-37.5
Description: DC Power Supply, 800V, 37.5A, 30kW
Data Sheet PDF: Sorensen SGA800-37.5
Add to Quote Cart
Cart updated.
Continue shopping
or
go to your quote cart

SORENSEN SGA800-37.5 DC Power Supply (call for availability)The Sorensen SGA800-37.5 DC Power Supply is a high powered, programmable power supply designed for exceptional load transient response, low noise, and the highest power density in the industry. The power density is enhanced by a stylish front air intake allowing supplies to be stacked without any required clearance between units.The Sorensen  SGA800-37.5 DC Power Supply (SGA = Sorensen General Purpose Analog), with its high performance power electronics, meets the need for simple front panel analog controls or external control. It provides essential features like 10-turn potentiometers for setting voltage and cur, 3 ½ digit LED readout, plus front panel over-voltage protection (OVP) preview/adjustment and reset.Features and Specifications of the Sorensen SGA800-37.5 DC Power Supply include:

  • High Power Density: Up to 30 kW in a 6U chassis
  • Wide Voltage Range: 0-10V up to 0-800V, in increments of 3 kW from 5 to 30 kW
  • Fast Load Transient Response: Protection from undesired voltage excursions
  • Low RMS and P-P Noise:  Suitable for the most sensitive applications
  • Parallelable up to 150 kW: Expandable as your requirement grows
  • Modular Design: Upgradeable for the ultimate in investment protection
  • 16-bit Resolution:  Optional IEEE-488.2 + RS-232C + Ethernet provides precise control

    • Common:

  • Remote Sense:  Terminals are provided to sense output voltage at point of load. Maximum line drop 5% of rated voltage per line for 40-100V models, line drop 1V of rated voltage per line for 10-20V models, 1.5V for 30V models, 2% of rated voltage per line for models 160V and greater. (Greater line drop is allowed, but output regulation specifications no longer apply).
  • Parallel Operation:  Up to 5 units may be paralleled for additional cur within the power supply single-unit specifications, with exception of the DC output cur set accuracy. Additional paralleled SG units will add 0.3% inaccuracy per unit. To parallel more than 5 units, contact factory.
  • Series Operation:  Up to 2 units

    • Input:

  • Nominal Voltage 3 phase, 3 wire + ground: 
      • 208/220 VAC (operating range 187 – 242 VAC)
      • 380/400 VAC (operating range 342 – 440 VAC)
      • 440/480 VAC (operating range 396 – 528 VAC)
  • Frequency:  47 – 63Hz , 400Hz
  • Power Factor: 
      • >0.9 typical for 208/220 VAC input (10V – 800V)
      • >0.78 typical for 380/400 VAC input (40V – 800V)
      • >0.9 typical for 380/480 VAC input (10V – 30V)
      • >0.7 typical for 440/480 VAC input (40V – 800V)
      • >0.9 typical for 440/480 VAC input (10V – 30V)
  • Protection:  ½ cycle ride-though on all three phases, 3 cycle ride through on single phase; missing phase shutdown (800V model 6.4 msec on all 3 phases)
    • 208/220 VAC (operating range 187 – 242 VAC)
    • 380/400 VAC (operating range 342 – 440 VAC)
    • 440/480 VAC (operating range 396 – 528 VAC)
  • 208/220 VAC (operating range 187 – 242 VAC)
  • 380/400 VAC (operating range 342 – 440 VAC)
  • 440/480 VAC (operating range 396 – 528 VAC)
    • >0.9 typical for 208/220 VAC input (10V – 800V)
    • >0.78 typical for 380/400 VAC input (40V – 800V)
    • >0.9 typical for 380/480 VAC input (10V – 30V)
    • >0.7 typical for 440/480 VAC input (40V – 800V)
    • >0.9 typical for 440/480 VAC input (10V – 30V)
  • >0.9 typical for 208/220 VAC input (10V – 800V)
  • >0.78 typical for 380/400 VAC input (40V – 800V)
  • >0.9 typical for 380/480 VAC input (10V – 30V)
  • >0.7 typical for 440/480 VAC input (40V – 800V)
  • >0.9 typical for 440/480 VAC input (10V – 30V)

    • Output:

  • Voltage and Cur Range: 800V, 37.5A, 30kW
  • Ripple & Noise:
      • rms(20Hz-300kHz): 80mV
      • p-p: 500mV
    • rms(20Hz-300kHz): 80mV
    • p-p: 500mV
  • rms(20Hz-300kHz): 80mV
  • p-p: 500mV

    • Programming & Read-Back Specifications:

  • Front Panel Display:
    • Programming:
      • Accuracy: +/- (0.5%fs + 1 digit)
      • Resolution: 3.5 digits
    • Read-Back Monitoring:
      • Accuracy: +/- (0.5%fs + 1 digit)
      • Resolution: 3.5 digits
    • Knob control & Display read-back
  • Remote Analog Interface: 
    • Programming:
      • Accuracy:
        • Voltage: +/-0.25% of full scale
        • Cur: 0.8% of full scale 
    • Read-Back Monitoring:
      • Accuracy: +/-1.0% of full scale
    • 25-pin D-sub connector (0~5 V or 0~10 V)
  • Remote Digital Interface:
    • Programming:
      • Accuracy:
        • Voltage:  +/- 0.1% of full scale
        • Cur: +/- 0.4% of full scale
      • Resolution: +/-0.002% of full scale
    • Read-Back Monitoring:
      • Accuracy:
        • Voltage:  +/- 0.15% of full scale
        • Cur:  +/- 0.4% of full scale
      • Resolution:  +/-0.002% of full scale
    • RS-232C (Standard on SGI), Optional IEEE-488.2 and Optional LXI Compliant 10/100 base-T Ethernet
  • OVP:
    • Programming:
      • Accuracy: +/- 1% of full scale
      • Resolution: +/-0.002% of full scale
    • Programming range: 5-110% Configured from front panel, remote analog or via optional digital inputs
  • User I/O:
    • Disconnect & Polarity-reversal relay control (Only available with Ethernet Option)
  • Programming:
    • Accuracy: +/- (0.5%fs + 1 digit)
    • Resolution: 3.5 digits
  • Read-Back Monitoring:
    • Accuracy: +/- (0.5%fs + 1 digit)
    • Resolution: 3.5 digits
  • Knob control & Display read-back
  • Accuracy: +/- (0.5%fs + 1 digit)
  • Resolution: 3.5 digits
  • Accuracy: +/- (0.5%fs + 1 digit)
  • Resolution: 3.5 digits
  • Programming:
    • Accuracy:
      • Voltage: +/-0.25% of full scale
      • Cur: 0.8% of full scale 
  • Read-Back Monitoring:
    • Accuracy: +/-1.0% of full scale
  • 25-pin D-sub connector (0~5 V or 0~10 V)
  • Accuracy:
    • Voltage: +/-0.25% of full scale
    • Cur: 0.8% of full scale 
  • Voltage: +/-0.25% of full scale
  • Cur: 0.8% of full scale 
  • Accuracy: +/-1.0% of full scale
  • Programming:
    • Accuracy:
      • Voltage:  +/- 0.1% of full scale
      • Cur: +/- 0.4% of full scale
    • Resolution: +/-0.002% of full scale
  • Read-Back Monitoring:
    • Accuracy:
      • Voltage:  +/- 0.15% of full scale
      • Cur:  +/- 0.4% of full scale
    • Resolution:  +/-0.002% of full scale
  • RS-232C (Standard on SGI), Optional IEEE-488.2 and Optional LXI Compliant 10/100 base-T Ethernet
  • Accuracy:
    • Voltage:  +/- 0.1% of full scale
    • Cur: +/- 0.4% of full scale
  • Resolution: +/-0.002% of full scale
  • Voltage:  +/- 0.1% of full scale
  • Cur: +/- 0.4% of full scale
  • Accuracy:
    • Voltage:  +/- 0.15% of full scale
    • Cur:  +/- 0.4% of full scale
  • Resolution:  +/-0.002% of full scale
  • Voltage:  +/- 0.15% of full scale
  • Cur:  +/- 0.4% of full scale
  • Programming:
    • Accuracy: +/- 1% of full scale
    • Resolution: +/-0.002% of full scale
  • Programming range: 5-110% Configured from front panel, remote analog or via optional digital inputs
  • Accuracy: +/- 1% of full scale
  • Resolution: +/-0.002% of full scale
  • Disconnect & Polarity-reversal relay control (Only available with Ethernet Option)

    •     

    • No resources found for given product name.

    Sorensen SGA800-37.5 Product Overview

    No resources found for given product name.