Tektronix THS3024 (call for availability)The Tektronix THS3024 Handheld Oscilloscope is packed with analysis tools to help you validate your device’s operation and identify issues quickly. Deep record length per channel allows the capturing of more signal information at higher sample rates to clearly see signal details. The Tektronix THS3024 Oscilloscope’s rugged, portable design, with 4 isolated channels and up to 7 hours of battery life, lets you safely make floating or diffeial measurements on the bench or in the field. This versitile instrument comes with both a USB host and USB mini port located on the side panel enabling you to quickly and easily save instrument settings, screenshots, and waveform data onto a flash device or transfer the data directly to a PC.Features and Specifications of the Tektronix THS3024 Handheld Oscilloscope includes:
Features:
- 4 fully isolated and floating channels
- 21 Automatic measurements
- Waveform Math and FFT Spectral Analysis
- Volts, time, frequency, watts cursor measurements
- Measurement data logging with TrendPlot™
- Waveform pass/fail limit testing
- Automatic 100 display screens recorder
- 7 Hours of continuous battery operation
- Embedded analog and digital design
- Power devices, power electronics, and power supply design
- Automotive and avionics design and maintenance
- Industrial equipment design and installation
- Field test and service
Specifications:
- Vertical System Analog Channels:
- Isolated input channels: 4
- Analog bandwidth (-3 dB): 200 MHz
- Rise time: 1.7 ns
- Hardware bandwidth limits: 20 kHz, 20 MHz, or full
- Input coupling: AC, DC
- Imput impedance: 1 MΩ ±1%, 14 pF ±2 pF
- Input sensitivity range: 2 mV/div to 100 V/div
- Vertical resolution: 8 bits
- DC gain accuracy: ±2.1% of reading +0.04 × range/div for 5 mV/div to 100 V/div
- Max BNC input voltage: (1 MΩ) 300 VRMS CAT III from BNC signal to BNC shell
- Max probe voltage (with standard THP0301-X probe): 300 VRMS CAT III from 10:1 probe tip signal to BNC and reference lead
- Float voltage: 1000 VRMS CAT II / 600 VRMS CAT III from BNC shell to earth ground
- Trace positioning: ±4 divisions
- Horizontal System:
- Maximum sample rate: 5 GS/s (1.25 GS/s 4-ch)
- Maximum record length (all channels):
- 10,000 points
- 30,000 points in Roll mode (4 ms to 2 min / div)
- Time-base range (s/div): 2 ns to 4 s
- Delay time range:
- 1 full screen (12 divisions) of pre-trigger
- or up to 100 screens (1,200 divisions) of post-trigger
- Timing accuracy: ±100 ppm + 0.04 div
- Zoom: Horizontally expand or compress a live or stopped waveform
- Automatic Setup:
- Autoset: Single-button, automatic setup of all channels for vertical, horizontal, and trigger systems
- Autorange: Continuous auto-setup of vertical, horizontal, and trigger systems that track signal changes
- Storage Memory:
- Reference: 4 user-definable reference traces
- Waveform: Stores 30 internal scope records (4 traces each) with screen image and corresponding setup
- Recording: Store 10 internal recording that can be:
- a 100-screen replay sequence
- a Roll-mode recording
- or a TrendPlot™ measurement recording
- Screen Image: Store up to 9 internally or 256 BMP images to an external USB storage drive
- Real-time Clock: Time and date stamp of all stored data
- Input/Output Ports:
- USB Host Port: Supports USB mass storage devices
- USB Device Port: Mini-USB-B connector allows for communication/control of Oscilloscope
- Probe Compensator Output:
- Side-panel Output:
- Amplitude: 1.225 Vp-p
- Frequency: 500 Hz
- Kensington-style lock: Side-panel security slot connects to standard Kensington-style lock
- Software:
- OpenChoice® Desktop:
- Enables fast, easy communication between a Windows PC and the THS3024 Oscilloscope
- Transfer and save settings, waveforms, and screen images
- Power Source:
- Battery: 7 hour, 10.8 V rechargeable Li-Ion battery
- Battery charging time: 5 hours
- Line power: AC power adapter/charger
- Power source voltage: 100 V to 240 V AC ±10%
- Power source frequency: 50 Hz to 60 Hz
4 fully isolated and floating channels
21 Automatic measurements
Waveform Math and FFT Spectral Analysis
Volts, time, frequency, watts cursor measurements
Measurement data logging with TrendPlot™
Waveform pass/fail limit testing
Automatic 100 display screens recorder
7 Hours of continuous battery operation
Embedded analog and digital design
Power devices, power electronics, and power supply design
Automotive and avionics design and maintenance
Industrial equipment design and installation
Field test and service
Vertical System Analog Channels:
- Isolated input channels: 4
- Analog bandwidth (-3 dB): 200 MHz
- Rise time: 1.7 ns
- Hardware bandwidth limits: 20 kHz, 20 MHz, or full
- Input coupling: AC, DC
- Imput impedance: 1 MΩ ±1%, 14 pF ±2 pF
- Input sensitivity range: 2 mV/div to 100 V/div
- Vertical resolution: 8 bits
- DC gain accuracy: ±2.1% of reading +0.04 × range/div for 5 mV/div to 100 V/div
- Max BNC input voltage: (1 MΩ) 300 VRMS CAT III from BNC signal to BNC shell
- Max probe voltage (with standard THP0301-X probe): 300 VRMS CAT III from 10:1 probe tip signal to BNC and reference lead
- Float voltage: 1000 VRMS CAT II / 600 VRMS CAT III from BNC shell to earth ground
- Trace positioning: ±4 divisions
Horizontal System:
- Maximum sample rate: 5 GS/s (1.25 GS/s 4-ch)
- Maximum record length (all channels):
- 10,000 points
- 30,000 points in Roll mode (4 ms to 2 min / div)
- Time-base range (s/div): 2 ns to 4 s
- Delay time range:
- 1 full screen (12 divisions) of pre-trigger
- or up to 100 screens (1,200 divisions) of post-trigger
- Timing accuracy: ±100 ppm + 0.04 div
- Zoom: Horizontally expand or compress a live or stopped waveform
Automatic Setup:
- Autoset: Single-button, automatic setup of all channels for vertical, horizontal, and trigger systems
- Autorange: Continuous auto-setup of vertical, horizontal, and trigger systems that track signal changes
Storage Memory:
- Reference: 4 user-definable reference traces
- Waveform: Stores 30 internal scope records (4 traces each) with screen image and corresponding setup
- Recording: Store 10 internal recording that can be:
- a 100-screen replay sequence
- a Roll-mode recording
- or a TrendPlot™ measurement recording
- Screen Image: Store up to 9 internally or 256 BMP images to an external USB storage drive
- Real-time Clock: Time and date stamp of all stored data
Input/Output Ports:
- USB Host Port: Supports USB mass storage devices
- USB Device Port: Mini-USB-B connector allows for communication/control of Oscilloscope
- Probe Compensator Output:
- Side-panel Output:
- Amplitude: 1.225 Vp-p
- Frequency: 500 Hz
- Kensington-style lock: Side-panel security slot connects to standard Kensington-style lock
Software:
- OpenChoice® Desktop:
- Enables fast, easy communication between a Windows PC and the THS3024 Oscilloscope
- Transfer and save settings, waveforms, and screen images
Power Source:
- Battery: 7 hour, 10.8 V rechargeable Li-Ion battery
- Battery charging time: 5 hours
- Line power: AC power adapter/charger
- Power source voltage: 100 V to 240 V AC ±10%
- Power source frequency: 50 Hz to 60 Hz
Isolated input channels: 4
Analog bandwidth (-3 dB): 200 MHz
Rise time: 1.7 ns
Hardware bandwidth limits: 20 kHz, 20 MHz, or full
Input coupling: AC, DC
Imput impedance: 1 MΩ ±1%, 14 pF ±2 pF
Input sensitivity range: 2 mV/div to 100 V/div
Vertical resolution: 8 bits
DC gain accuracy: ±2.1% of reading +0.04 × range/div for 5 mV/div to 100 V/div
Max BNC input voltage: (1 MΩ) 300 VRMS CAT III from BNC signal to BNC shell
Max probe voltage (with standard THP0301-X probe): 300 VRMS CAT III from 10:1 probe tip signal to BNC and reference lead
Float voltage: 1000 VRMS CAT II / 600 VRMS CAT III from BNC shell to earth ground
Trace positioning: ±4 divisions
Maximum sample rate: 5 GS/s (1.25 GS/s 4-ch)
Maximum record length (all channels):
- 10,000 points
- 30,000 points in Roll mode (4 ms to 2 min / div)
Time-base range (s/div): 2 ns to 4 s
Delay time range:
- 1 full screen (12 divisions) of pre-trigger
- or up to 100 screens (1,200 divisions) of post-trigger
Timing accuracy: ±100 ppm + 0.04 div
Zoom: Horizontally expand or compress a live or stopped waveform
10,000 points
30,000 points in Roll mode (4 ms to 2 min / div)
1 full screen (12 divisions) of pre-trigger
or up to 100 screens (1,200 divisions) of post-trigger
Autoset: Single-button, automatic setup of all channels for vertical, horizontal, and trigger systems
Autorange: Continuous auto-setup of vertical, horizontal, and trigger systems that track signal changes
Reference: 4 user-definable reference traces
Waveform: Stores 30 internal scope records (4 traces each) with screen image and corresponding setup
Recording: Store 10 internal recording that can be:
- a 100-screen replay sequence
- a Roll-mode recording
- or a TrendPlot™ measurement recording
Screen Image: Store up to 9 internally or 256 BMP images to an external USB storage drive
Real-time Clock: Time and date stamp of all stored data
a 100-screen replay sequence
a Roll-mode recording
or a TrendPlot™ measurement recording
USB Host Port: Supports USB mass storage devices
USB Device Port: Mini-USB-B connector allows for communication/control of Oscilloscope
Probe Compensator Output:
- Side-panel Output:
- Amplitude: 1.225 Vp-p
- Frequency: 500 Hz
Kensington-style lock: Side-panel security slot connects to standard Kensington-style lock
Side-panel Output:
- Amplitude: 1.225 Vp-p
- Frequency: 500 Hz
Amplitude: 1.225 Vp-p
Frequency: 500 Hz
OpenChoice® Desktop:
- Enables fast, easy communication between a Windows PC and the THS3024 Oscilloscope
- Transfer and save settings, waveforms, and screen images
Enables fast, easy communication between a Windows PC and the THS3024 Oscilloscope
Transfer and save settings, waveforms, and screen images
Battery: 7 hour, 10.8 V rechargeable Li-Ion battery
Battery charging time: 5 hours
Line power: AC power adapter/charger
Power source voltage: 100 V to 240 V AC ±10%
Power source frequency: 50 Hz to 60 Hz