Rohde & Schwarz FSMR3
| Attribute | Value |
|---|---|
| Frequency Range | 20 Hz to 3 GHz |
| Measurement Range | -67 dBm to +30 dBm |
| Phase Noise | -143 dBc/Hz at 1 GHz carrier, 10 kHz offset |
| Input Impedance | 50 Ohm |
| Display | 10.1-inch capacitive touchscreen, 1280 x 800 pixels |
| Spurious-Free Dynamic Range (SFDR) | Up to 110 dB |
| Resolution Bandwidth (RBW) | 1 Hz to 10 MHz |
| Interfaces | USB, LAN (Ethernet), GPIB (optional), HDMI |
| Power Supply | 100 V to 240 V AC, 50 Hz to 60 Hz |
| Dimensions (W x H x D) | 426 mm x 234 mm x 412 mm |
Rohde & Schwarz FSMR3 Options:
- FSMR3 - FSU-B4 - Low-Aging OCXO
- FSMR3 - FSU-B9 - Tracking Generator, 100 kHz to 3.6 GHz
- FSMR3 - FSU-B12 - Attenuator for Tracking Generator
- FSMR3 - FSMR-B18 - Removable Hard Disk
- FSMR3 - FSMR-B19 - Second Hard Disk (requires R&S FSMR-B18)
- FSMR3 - FSMR-B73 - Vector Signal Analyzer
- FSMR3 - FSU-B25 - 20 dB RF Preamplifier and Electronic Attenuator, 100 kHz to 3.6 GHz
- FSMR3 - FSMR-Z2 - Attenuation Calibration Kit
- FSMR3 - RT-ZA9 - N-Type Adapter for R&S RT-Zx Probes
- FSMR3 - FS-K15 - VOR/ILS Measurement Demodulator
- FSMR3 - FS-K30 - Application Firmware for Noise Figure and Gain Measurements
- FSMR3 - FS-K40 - Application Firmware for Phase Noise Measurement
- FSMR3 - FS-K5 - GSM/EDGE Application Firmware
- FSMR3 - FS-K72 - 3GPP BTS/NodeB FDD Application Firmware
- FSMR3 - FS-K73 - 3GPP UE FDD Application Firmware
- FSMR3 - FS-K74 - 3GPP HSDPA BTS Application Firmware (requires R&S FS-K72)
- FSMR3 - FS-K76 - 3GPP TD-SCDMA BTS Application Firmware
- FSMR3 - FS-K77 - 3GPP TD-SCDMA UE Application Firmware
- FSMR3 - FS-K82 - CDMA2000 BTS Application Firmware
- FSMR3 - FS-K83 - CDMA2000 MS Application Firmware (incl. 1xEV-DV)
- FSMR3 - FS-K84 - CDMA2000 1xEV-DO BTS Application Firmware
- FSMR3 - FS-K85 - CDMA2000 1xEV-DO MS Application Firmware
| Model | FSMR3 |
|---|
The Rohde & Schwarz FSMR3 is a multifunctional RF and microwave measuring receiver supporting frequencies up to 50 GHz. It integrates spectrum analysis, power measurement, and modulation analysis with ultra-high dynamic range, built-in power sensor support, and advanced phase noise analysis in a compact form.
Perfect for calibration, metrology labs, and R&D, it provides high-resolution time and frequency-domain measurements with direct power sensor connectivity and wide input interface options.
Testwall can supply the used Rohde & Schwarz FSMR3, fully tested. With expert support and global delivery, Testwall ensures high-performance instrumentation with unmatched reliability and service quality. Please contact us directly if you need calibration or repair of the Rohde & Schwarz FSMR3.
