Rohde & Schwarz
Rohde & Schwarz RTO1044
4 Ch 4 GHz Digital Oscilloscope
4 GHz Bandwidth
4 Number of Channels
20 Gsample/s (single channel), 10 Gsample/s (all channels) Sample Rate
100 Mpoints (standard), up to 400 Mpoints (optional) Memory Depth
8 bits (up to 16 bits with high-resolution mode) Vertical Resolution
| Attribute | Value |
|---|---|
| Bandwidth | 4 GHz |
| Number of Channels | 4 |
| Sample Rate | 20 Gsample/s (single channel), 10 Gsample/s (all channels) |
| Memory Depth | 100 Mpoints (standard), up to 400 Mpoints (optional) |
| Vertical Resolution | 8 bits (up to 16 bits with high-resolution mode) |
| Rise Time | 116 ps |
| Input Impedance | 50 Ω / 1 MΩ |
| Display | 12.1-inch XGA capacitive touchscreen display |
| Waveform Update Rate | Up to 1,000,000 waveforms/second |
| Trigger Types | Edge, glitch, width, runt, window, timeout, interval, slew rate, pattern, serial bus triggers |
Rohde & Schwarz RTO1044 Options:
- RTO1044 - B1 - Mixed Signal Option, 400 MHz (additional 16 logic channels)
- RTO1044 - B4 - OCXO 10 MHz (precision reference frequency with reference input and output connectors)
- RTO1044 - B10 - Additional GPIB Interface
- RTO1044 - B18 - Solid State Disk
- RTO1044 - B19 - Additional Removable Hard Disk
- RTO1044 - B101 - Memory Upgrade, 50 Msample per channel
- RTO1044 - B102 - Memory Upgrade, 100 Msample per channel
- RTO1044 - B103 - Memory Upgrade, 200 Msample per channel (instruments with operating system Windows 7 embedded)
- RTO1044 - B104 - Memory Upgrade, 400 Msample per channel (instruments with operating system Windows 7 embedded)
- RTO1044 - B205 - Upgrade of RTO1024 to 4 GHz bandwidth
- RTO1044 - K1 - I2C/SPI Serial Decoding
- RTO1044 - K2 - UART/RS-232/RS-422/RS-485 Serial Decoding
- RTO1044 - K3 - CAN/LIN Serial Triggering and Decoding
- RTO1044 - K4 - FlexRay™ Serial Triggering and Decoding
- RTO1044 - K5 - I2S Serial Triggering and Decoding
- RTO1044 - K6 - MIL-STD-1553 Serial Triggering and Decoding
- RTO1044 - K7 - ARINC 429 Serial Triggering and Decoding
- RTO1044 - K8 - Ethernet Serial Decoding
- RTO1044 - K9 - CAN-FD Serial Triggering and Decoding
- RTO1044 - K10 - SENT Serial Triggering and Decoding
- RTO1044 - K11 - I/Q Software Interface
- RTO1044 - K12 - Basic Jitter Analysis
- RTO1044 - K13 - Clock Data Recovery (CDR)
- RTO1044 - K17 - High Definition Mode
- RTO1044 - K21 - USB 2.0 Compliance Test
- RTO1044 - K22 - Ethernet Compliance Test
- RTO1044 - K23 - Ethernet 10G Compliance Test
- RTO1044 - K24 - BroadR-Reach® Compliance Test
- RTO1044 - K26 - D-PHY Compliance Test
- RTO1044 - K31 - Power Analysis
- RTO1044 - K40 - MIPI RFFE Serial Triggering and Decoding
- RTO1044 - K42 - MIPI D-PHY Serial Triggering and Decoding
- RTO1044 - K50 - Manchester and NRZ Serial Triggering and Decoding
- RTO1044 - K52 - 8b10b Serial Decoding
- RTO1044 - K55 - MDIO Serial Triggering and Decoding
- RTO1044 - K60 - USB 1.0/1.1/2.0/HSIC Serial Triggering and Decoding
| Model | RTO1044 |
|---|
The ROHDE & SCHWARZ RTO1044 Oscilloscope features a 4 GHz bandwidth, 4 analog channels, 20 GS/s sampling rate, and an MSO option for 16 digital channels, delivering high-performance signal analysis in a compact form.
It supports hardware-accelerated analysis, low noise, real-time digital triggering, and deep memory up to 80 MSa per channel for rapid, accurate fault detection.
Testwall can supply the used ROHDE & SCHWARZ RTO1044, fully tested. With expert support and global delivery, Testwall ensures high-performance instrumentation with unmatched reliability and service quality. Please contact us directly if you need calibration or repair of the ROHDE & SCHWARZ RTO1044.
