Rohde & Schwarz
Rohde & Schwarz ZV-Z32
Calibration Kit, 26.5 GHz
300 kHz to 9 GHz Frequency Range
50 Ω Impedance
N-type (female) Connector Type
Mechanical calibration kit Calibration Standard Type
Rohde & Schwarz Vector Network Analyzers (ZVA, ZVB, ZVL series) Compatible Instruments
| Attribute | Value |
|---|---|
| Frequency Range | 300 kHz to 9 GHz |
| Impedance | 50 Ω |
| Connector Type | N-type (female) |
| Calibration Standard Type | Mechanical calibration kit |
| Compatible Instruments | Rohde & Schwarz Vector Network Analyzers (ZVA, ZVB, ZVL series) |
| Standards Included | Open, Short, Match, Through (OSMT) |
| Directivity | > 40 dB |
| Return Loss (Match) | > 40 dB |
| Temperature Range (Operating) | 0 °C to +55 °C |
| Calibration Method | TOSM (Through-Open-Short-Match) |
Rohde & Schwarz ZN-Z32 Options:
- ZN-Z32 - 1328.7638.02 - Inline Calibration Unit, 10 MHz to 8.5 GHz, incl. temperature characterization (+5°C to +40°C), Calibration port: SMA (female), DUT port: SMA (male)
- ZN-Z33 - 1328.7644.02 - Inline Calibration Unit, 10 MHz to 40 GHz, incl. temperature characterization (+5°C to +40°C), Calibration port: 2.92 mm (female), DUT port: 2.92 mm (male)
- ZN-Z33 - 1328.7644.03 - Inline Calibration Unit, 10 MHz to 40 GHz, TVAC qualified model (w/o display and control button), incl. temperature characterization (–30°C to +80°C), Calibration port: 2.92 mm (female), DUT port: 2.92 mm (male)
- ZN-Z30 - 1328.7609.02 - Inline Calibration Unit Controller for R&S ZN-Z32/ZN-Z33, support of two CAN bus lines with up to 24 units each, incl. 2 × R&S ZN-CAN2 CAN-bus control cables
- ZN-CAN025 - 1339.3622.02 - CAN-bus Control Cable for in-line calibration modules, length 250 mm
- ZN-CAN2 - 1339.3639.02 - CAN-bus Control Cable for in-line calibration modules, length 2 m
- ZN-CAN10 - 1339.3645.02 - CAN-bus Control Cable for in-line calibration modules, length 10 m
- ZN-CANA - 1339.3651.02 - CAN-bus Adapter Cable for in-line calibration modules to extend CAN-bus cable length by connecting R&S ZN-CANx control cables, length 250 mm
| Model | ZV-Z32 |
|---|
Rohde & Schwarz ZV-Z32 3.5mm Calibration Kit with fixed matches 0-26.5 GHz
