Schaffner NSG2025
| Attribute | Value |
|---|---|
| Output Voltage Range | Up to 4.4 kV peak |
| Pulse Rise Time | 5 ns (typical) |
| Pulse Duration | 50 ns / 100 ns (selectable) |
| Repetition Rate | Up to 100 kHz |
| Output Impedance | 50 Ω |
| Compliance Standards | IEC 61000-4-4 (EFT/Burst), EN 61000-4-4 |
| Burst Duration | 15 ms / 300 ms (selectable per IEC 61000-4-4) |
| Power Supply Input | 100–240 V AC, 50/60 Hz |
| Interface / Control | RS-232 / IEEE 488 (GPIB) remote control |
| Operating Temperature | 0°C to 40°C |
| Model | NSG2025 |
|---|
The Schaffner NSG 2025 is a high-end Fast Transient/Burst Generator designed for maximum flexibility in EMC testing. It supports a wide range of pulse voltages and burst frequencies, meeting IEC, EN, ANSI-IEEE standards and extended manufacturer requirements. With its building-block concept, it allows selection and combination of pulse generators, coupling networks, and EUT adapters for tailored test setups.
Pre-programmed IEC tests and user-configurable parameters ensure ease of operation, while advanced features like burst frequency up to 1 MHz and extended coupling modes provide readiness for future standards. It can couple pulses into mains voltage or apply them as high voltage for data and signal lines.
Testwall can supply the used Schaffner NSG 2025, fully tested. With expert support and global delivery, Testwall ensures high-performance instrumentation with unmatched reliability and service quality. Please contact us directly if you need calibration or repair of the Schaffner NSG 2025.
