Sorensen
Sorensen DCS60-18E Power Supply, 60V, 18A, 1000W
Power Supply, 60V, 18A, 1000W
0 - 60V DC Output Voltage
0 - 18A Output Current
1000W Output Power
105-132V / 210-264V AC, Single Phase Input Voltage
47 - 63 Hz Input Frequency
| Attribute | Value |
|---|---|
| Output Voltage | 0 - 60V DC |
| Output Current | 0 - 18A |
| Output Power | 1000W |
| Input Voltage | 105-132V / 210-264V AC, Single Phase |
| Input Frequency | 47 - 63 Hz |
| Line Regulation (Voltage) | 0.01% + 2mV |
| Load Regulation (Voltage) | 0.01% + 2mV |
| Output Ripple & Noise (RMS) | 20mV RMS / 100mV Peak-to-Peak |
| Operating Temperature | 0°C to 50°C (32°F to 122°F) |
| Interface / Programming | Analog Programming, Isolated RS-232/RS-485 Optional |
Sorensen DCS60-18E Power Supply, 60V, 18A, 1000W Options:
- DCS60-18E - M1 - Factory configured for 115 VAC input (1 kW and 1.2 kW units only)
- DCS60-18E - M9C - Internal IEEE-488/RS-232 Interface (can only support 12-bit slaves)
- DCS60-18E - M13 - Locking shafts (front panel potentiometers)
- DCS60-18E - M32 - Master/slave paralleling cable configured for two units
- DCS60-18E - M51A - Isolated analog programming control of V/I/OVP and isolated V/I monitor outputs up to 500V relative to the supply's return line
- DCS60-18E - M85 - 12-bit slave interface option for use with M9 or M130 master (3 ft. control cable included)
- DCS60-18E - M102 - Front panel binding posts for 1kW or 1.2kW, Models ≤30A, ≤100V. Not compatible with M9C, M85, M130, M131, M133, M135, M136
- DCS60-18E - M130 - LXI compliant 10/100 Base T Ethernet remote control master interface; includes web server for direct control of power supply via web browser
- DCS60-18E - M131 - 16-bit slave interface option for use with a M130 master (3 ft. control cable included)
- DCS60-18E - M133 - Output disconnect and polarity reversal controlled via SCPI commands. Limited to 1kW or 1.2kW, ≤100V, ≤60A
- DCS60-18E - M135 - M130 & M133 combination
- DCS60-18E - M136 - M131 & M133 combination
| Model | DCS60-18E |
|---|
