Sorensen
Sorensen DHP 40
0-7.5 400.0V Power Supply
0 – 40 V DC Output Voltage Range
0 – 30 A Output Current Range
1200 W Output Power
105–125 V AC / 210–250 V AC, 50/60 Hz Input Voltage
0.01% + 2 mV Line Regulation (Voltage)
| Attribute | Value |
|---|---|
| Output Voltage Range | 0 – 40 V DC |
| Output Current Range | 0 – 30 A |
| Output Power | 1200 W |
| Input Voltage | 105–125 V AC / 210–250 V AC, 50/60 Hz |
| Line Regulation (Voltage) | 0.01% + 2 mV |
| Load Regulation (Voltage) | 0.01% + 2 mV |
| Ripple and Noise (RMS) | 1 mV RMS typical |
| Operating Temperature Range | 0°C to 50°C |
| Remote Sensing | Yes, included for voltage drop compensation |
| Protection Features | Overvoltage protection (OVP), current limiting, thermal shutdown |
Sorensen DHP 40 Options:
- DHP - M1 - 360-440 VAC, 47-63 Hz, three phase, 3-wire plus ground, Delta or Wye may be used
- DHP - M2 - 432-528 VAC, 47-63 Hz, three phase, 3-wire plus ground, Delta or Wye may be used
- DHP - M8 - Internal RS-232 remote serial interface
- DHP - M9D - Internal IEEE-488.2 interface
- DHP - M10 - Both IEEE-488.2 and RS-232
- DHP - M11 - RS-232 and isolated analog programming
- DHP - M12 - IEEE-488.2 and isolated analog programming
- DHP - M14 - IEEE-488.2, RS-232 and isolated analog programming
- DHP - M51 - Isolated analog programming Input Voltage Options. This isolation allows users to control power supplies not connected to a common ground. In addition, in systems with high ambient noise or with large ground loop currents the control ground can be isolated from the power ground eliminating problems.
| Model | DHP |
|---|
