Sunrise
Sunrise Telecom SUNSET E1
Test Set
E1 (2.048 Mbps) Interface
G.703, G.704, G.706, G.732, PCM30, PCM31 Framing Formats
HDB3, AMI Line Coding
PRBS: 2^9-1, 2^11-1, 2^15-1, 2^20-1, 2^23-1, All Ones, All Zeros, Alternating Test Patterns
Bit Error Rate (BER), Frame Error Rate, Slip Rate, Signal Level, Pulse Mask Measurements
| Attribute | Value |
|---|---|
| Interface | E1 (2.048 Mbps) |
| Framing Formats | G.703, G.704, G.706, G.732, PCM30, PCM31 |
| Line Coding | HDB3, AMI |
| Test Patterns | PRBS: 2^9-1, 2^11-1, 2^15-1, 2^20-1, 2^23-1, All Ones, All Zeros, Alternating |
| Measurements | Bit Error Rate (BER), Frame Error Rate, Slip Rate, Signal Level, Pulse Mask |
| Connectors | BNC (75 Ohm) and RJ-48 (120 Ohm) |
| Impedance | 75 Ohm (coaxial) / 120 Ohm (balanced) |
| Power Supply | Internal rechargeable NiMH battery pack; AC adapter 100–240V, 50/60 Hz |
| Display | Backlit LCD display for real-time results and configuration |
| Operating Temperature | 0°C to 50°C (32°F to 122°F) |
Sunrise Telecom SUNSET E1 Options:
- Telecom - -A - Replace all 75Ω BNC (f) with 1.6/5.6 mm (f) 75Ω unbalanced connectors
- Telecom - -B - Replace all 75Ω BNC (f) with 120Ω BR2 (f) balanced connectors
- Telecom - -C - Replace all 75Ω BNC (f) with Bantam 120Ω balanced connectors
- Telecom - SS137 - High Capacity Battery Package: NiMH battery pack (SS139), 100-240 VAC AC/DC adapter (SS138C), Power Cord (SS429)
- Telecom - SS213 - Transmit Frequency Shift: Vary transmit frequency over ± 50 kbit/s in 2 kbit/s steps, and ± 200 bit/s (100 ppm) in 2 bit/s (1 ppm) steps. Set transmit level to 0 dB or -6 dB
- Telecom - SW100 - Remote Control: VT102 terminal emulation remote control via 8-pin mini DIN RS232C/V.24 DTE port. Includes printer cable (SS115B) and null modem adapter (SS122A)
- Telecom - SW171 - Enhanced Error Injection: Bit errors injected simultaneously in all channels
- Telecom - SW210 - Advanced Frame Word Applications: Setting of Sa4 to Sa8 bits in NFAS word. Display of TS0 and TS16
- Telecom - SW211 - E-bit Analysis and Injection: E-bit error measurements and analysis. E-bit error injection in auto/manual modes. (SW210 required)
| Model | Telecom |
|---|
