Teseq (Schaffner) NSG3060A
| Attribute | Value |
|---|---|
| Frequency Range | 9 kHz – 30 MHz |
| Output Voltage | Up to 6 kV peak (open circuit) |
| Output Current | Up to 3 kA peak (short circuit) |
| Waveform Types | Sinusoidal, burst, and transient waveforms per IEC/EN standards |
| Compliance Standards | IEC 61000-4-5, IEC 61000-4-4, IEC 61000-4-6, and related EMC immunity standards |
| Output Impedance | 2 Ω / 12 Ω selectable |
| Coupling Modes | Capacitive and inductive coupling supported |
| Control Interface | IEEE 488 (GPIB) and RS-232 remote control interfaces |
| Power Supply Input | 100–240 V AC, 50/60 Hz |
| Operating Temperature | 0°C to 40°C (32°F to 104°F) |
Teseq (Schaffner) NSG3060A Options:
- NSG3060A - NSG3060A-IEC - IEC model configuration (EFT/Burst, Surge, PQT)
- NSG3060A - NSG3060A-ANSI - ANSI model configuration (Surge, Ring wave, Telecom Surge)
- NSG3060A - NSG3060A-FULL - Full model configuration (EFT/Burst, Surge, PQT, Ring wave, Telecom Surge)
- NSG3060A - CDN3063A-C32 - Three phase 480 V / 32 A automatic coupling decoupling networks for Burst/EFT up to 4.8 kV, Surge, Ring Wave pulses up to 6.6 kV
- NSG3060A - CDN3063A-C63 - Three phase 480 V / 63 A automatic coupling decoupling network for Burst/EFT up to 4.8 kV, Surge, Ring Wave pulses up to 6.6 kV
- NSG3060A - CDN3063A-C100 - Three phase 480 V / 100 A automatic coupling decoupling network for Burst/EFT up to 4.8 kV, Surge, Ring Wave pulses up to 6.6 kV
- NSG3060A - CDN3425 - Burst EFT capacitive coupling clamp for data line coupling per IEC 61000-4-4
- NSG3060A - CDN117A-C6-4-1 - Coupling networks for unsymmetrical signal-/data lines (surge)
- NSG3060A - CDN118A-C6-4-1 - Coupling networks for symmetrical signal-/data lines (surge)
- NSG3060A - CDN HSS-2 - Coupling network for 2 kV surge pulse 1.2/50 µs IEC/EN 61000-4-5 on unshielded symmetrical high speed telecom lines (Ethernet)
- NSG3060A - PVF BKIT 1 - Burst/EFT verification set
- NSG3060A - MD210 - Voltage differential probe 7 kV common / differential 1000:1 / 100:1
- NSG3060A - MD300 - Current probe 5 kA
- NSG3060A - TVT1-250-16 - Manual step transformer, 16 AAC, 0/40/70/80% (accessory for IEC/EN 61000-4-11)
- NSG3060A - VAR3005A-S16 - Automatic single variable transformer, 1 x 16 A (accessory for IEC/EN 61000-4-11)
- NSG3060A - MFO6501A - Manual magnetic field option for IEC/EN 61000-4-8
- NSG3060A - MFC30 - Magnetic field coil 1 x 1 m; with MFO max. 40 A/m (IEC/EN 61000-4-8); Surge max. 1200 A/m (IEC/EN 61000-4-9)
- NSG3060A - MFC300 - Magnetic field coil 1 x 1 m; max. 330 A/m (IEC/EN 61000-4-8)
| Model | NSG3060A |
|---|
The Teseq Schaffner NSG3060A is a versatile multi-function generator designed for IEC and ANSI C62.41 & 45 testing. It delivers Surge Combination Wave up to 6.6 kV, Surge Ring Wave up to 6.6 kV, and EFT/Burst up to 4.8 kV. Equipped with a single phase 16 A CDN, it ensures precise compliance with IEC/EN 61000-4-4, -5, -12 standards. The 7.2” color touchscreen, intuitive control wheel, and virtual keypad allow seamless and accurate test setups.
Ideal for compliance and reliability testing, the Teseq Schaffner NSG3060A provides robust surge, ring wave, and EFT/Burst simulation capabilities in both development and certification environments.
Testwall can supply the used Teseq Schaffner NSG3060A, fully tested. With expert support and global delivery, Testwall ensures high-performance instrumentation with unmatched reliability and service quality. Please contact us directly if you need calibration or repair of the Teseq Schaffner NSG3060A.
