Teseq (Schaffner) NSG5500
| Attribute | Value |
|---|---|
| Surge Voltage Output | Up to 4 kV (open circuit) |
| Surge Current Output | Up to 2 kA (short circuit) |
| Waveforms Supported | 1.2/50 µs voltage, 8/20 µs current (combination wave per IEC 61000-4-5) |
| Coupling/Decoupling Network | Built-in CDN for AC and DC power line coupling |
| Output Impedance | 2 Ω (combination wave generator) |
| Applicable Standards | IEC 61000-4-5, EN 61000-4-5, ANSI/IEEE C62.41 |
| Phase Synchronization | 0° to 360° programmable phase angle synchronization to AC mains |
| Mains Voltage Input | 100–240 V AC, 50/60 Hz |
| Interface & Control | USB and RS-232 interface with PC software control capability |
| Operating Temperature Range | 0°C to 40°C (32°F to 104°F) |
| Model | NSG5500 |
|---|
The Teseq NSG5500 is a compact, modular Automotive Transient Immunity Test Set designed to meet ISO, SAE, DIN, JASO, and other global standards. It includes capacitive discharge pulse generators and integrates standard pulses like 1, 2a, 3, 5, 6, and 7 in a single chassis, with optional pulse 4 and 2b. The mainframe houses all system components with one output connector, built-in battery switching, and PC-based control via AutoStar™ under Windows.
Offering exceptional modularity, the NSG5500 ensures easy upgrades as standards evolve and includes advanced monitoring and signal control I/O at the rear panel.
Testwall can supply the used Teseq NSG5500, fully tested. With expert support and global delivery, Testwall ensures high-performance instrumentation with unmatched reliability and service quality. Please contact us directly if you need calibration or repair of the Teseq NSG5500.
