Amplifier Research 800A3A
| Attribute | Value |
|---|---|
| Frequency Range | 10 kHz – 3 MHz |
| Output Power | 800 Watts CW minimum |
| Gain | 50 dB minimum |
| Input Impedance | 50 Ohms |
| Output Impedance | 50 Ohms |
| Input for Rated Output | 100 mW (20 dBm) maximum |
| Harmonic Distortion | -10 dBc or less at rated output |
| Power Requirements | 220 VAC, Single Phase, 50/60 Hz, 30A |
| Cooling | Forced air, internal blower |
| Dimensions (H x W x D) | 8.75 in x 19 in x 26 in (222 mm x 483 mm x 660 mm) |
Amplifier Research 800A3A Options:
- 800A3A - 800A3A - Type N female RF Input (front), Type N female RF Output (front), with cabinet, 36.4 Kg (80 lb), 50.3 x 34.0 x 55.1 cm
- 800A3A - 800A3AM1 - Type N female RF Input (rear), Type N female RF Output (rear), with cabinet, 36.4 Kg (80 lb), 50.3 x 34.0 x 55.1 cm
- 800A3A - 800A3AM2 - Same as 800A3A with cabinet removed, 29.4 Kg (65 lb), 48.3 x 30.5 x 54.4 cm
- 800A3A - 800A3AM3 - Same as 800A3AM1 with cabinet removed, 29.4 Kg (65 lb), 48.3 x 30.5 x 54.4 cm
| Model | 800A3A |
|---|
The Amplifier Research 800A3A is a broadband, solid-state amplifier delivering 800 watts of swept power with wide instantaneous bandwidth. This self-contained, air-cooled system includes a digital control panel for local and remote management, showing forward/reflected power and internal status. Features include gain control, RF output level protection, and a matching transformer with selectable taps for non-50-ohm loads.
Designed for demanding RF applications, the 800A3A provides remote control via IEEE-488, RS-232, and USB, with rear-panel bus interfaces and front-panel keylock for operation security.
Testwall can supply the used Amplifier Research 800A3A, fully tested. With expert support and global delivery, Testwall ensures high-performance instrumentation with unmatched reliability and service quality. Please contact us directly if you need calibration or repair of the Amplifier Research 800A3A.
