Anritsu MS2720T
| Attribute | Value |
|---|---|
| Frequency Range | 9 kHz to 9 GHz (MS2720T-0709), with options up to 43 GHz |
| Displayed Average Noise Level (DANL) | -163 dBm (typical, with preamplifier enabled at 1 GHz) |
| Phase Noise | -104 dBc/Hz at 10 kHz offset from 1 GHz carrier |
| Dynamic Range | Up to 109 dB (TOI to DANL) |
| Resolution Bandwidth (RBW) | 1 Hz to 10 MHz in 1-3-10 sequence |
| Amplitude Accuracy | ±0.5 dB (typical) |
| Battery Life | Approximately 2 hours with standard battery; up to 4 hours with extended battery |
| Display | 7-inch sunlight-viewable color touchscreen display |
| Weight | Approximately 3.9 kg (8.6 lbs) with battery |
| Operating Temperature | -10°C to +55°C (14°F to 131°F) |
Anritsu MS2720T Options:
- MS2720T - 0709 - Frequency Range 9 kHz to 9 GHz
- MS2720T - 0713 - Frequency Range 9 kHz to 13 GHz
- MS2720T - 0720 - Frequency Range 9 kHz to 20 GHz
- MS2720T - 0732 - Frequency Range 9 kHz to 32 GHz
- MS2720T - 0743 - Frequency Range 9 kHz to 43 GHz
- MS2720T - 0809 - 9 GHz Tracking Generator (Requires Option 709)
- MS2720T - 0813 - 13 GHz Tracking Generator (Requires Option 713)
- MS2720T - 0820 - 20 GHz Tracking Generator (Requires Option 720)
- MS2720T - 0025 - Interference Analyzer (Option 31 is recommended)
- MS2720T - 0027 - Channel Scanner
- MS2720T - 0431 - Coverage Mapping (Requires Option 31 for full functionality)
- MS2720T - 0444 - EMF Measurements (Requires Anritsu Isotropic Antenna)
- MS2720T - 0509 - AM/FM/PM Measurements (Option 431 required for full functionality)
- MS2720T - 0024 - I/Q Waveform Capture (Requires Option 9)
- MS2720T - 0089 - Zero-Span IF Output
- MS2720T - 0090 - Gated Sweep
- MS2720T - 0019 - High Accuracy Power Meter (Requires USB Power Sensor, sold separately)
- MS2720T - 0009 - Demodulation Hardware
- MS2720T - 0880 - GSM/GPRS/EDGE Measurements (Requires Option 9)
- MS2720T - 0881 - W-CDMA/HSPA+ Measurements (Requires Option 9, Option 31 recommended)
- MS2720T - 0882 - TD-SCDMA/HSPA+ Measurements (Requires Option 9, Option 31 required for full functionality)
- MS2720T - 0883 - LTE/LTE-A FDD/TDD Measurements (Requires Option 9, Option 31 required for full functionality)
- MS2720T - 0884 - CDMA/EV-DO Measurements (Requires Option 9, Option 31 required for full functionality)
- MS2720T - 0885 - WiMAX Fixed/Mobile Measurements (Requires Option 9, Option 31 required for full functionality)
- MS2720T - 0007 - Secure Data Operation
- MS2720T - 0031 - GPS Receiver (Requires GPS Antenna, sold separately)
- MS2720T - 0098 - Standard Calibration (ANSI Z540-1-1994)
- MS2720T - 0099 - Premium Calibration (ANSI Z540-1-1994 plus test data)
| Model | MS2720T |
|---|
The Anritsu MS2720T is a high-performance handheld spectrum and interference analyzer offering frequency coverage up to 43 GHz with a tracking generator to 20 GHz. It consolidates over 30 instruments in one, including spectrum scan, interference mapping, channel power, and emission mask measurements. With excellent dynamic range (DANL ≈ –164 dBm) and phase noise (≈ –112 dBc/Hz @1 GHz), it delivers near-benchtop accuracy in rugged field conditions.
Its daylight-viewable touchscreen, spectrogram tools, RSSI mapping, and PIM alert scripting provide engineers with fast, accurate interference hunting and signal analysis. A field-exchangeable battery ensures extended portability in demanding environments.
Testwall can supply the used Anritsu MS2720T Spectrum Analyzer, fully tested. With expert support and global delivery, Testwall ensures high-performance instrumentation with unmatched reliability and service quality. Please contact us directly if you need calibration or repair of the Anritsu MS2720T Spectrum Analyzer.
