EMCO 3810/2
| Attribute | Value |
|---|---|
| Output Voltage Range | 0 – 3.5 kV DC |
| Output Current (Maximum) | 2 mA |
| Input Voltage | 12 V DC |
| Input Current | 300 mA (maximum) |
| Voltage Regulation | 0.1% (line and load) |
| Ripple and Noise | 10 mV peak-to-peak (maximum) |
| Output Polarity | Positive |
| Control Interface | 0 – 5 V analog control input |
| Operating Temperature Range | 0°C to +50°C |
| Package / Form Factor | PCB mount module |
EMCO 3810/2 Options:
- 3810/2 - NM - NEMA power out connector
- 3810/2 - SH - SCHUKO power out connector
- 3810/2 - BS - British power out connector
- 3810/2 - MP4 - Cord Loom: provides a repeatable method for looping excess cord in serpentine fashion, per MP4
| Model | 3810/2 |
|---|
The Emco 3810/2 Line Impedance Stabilization Network (LISN) is a dual-channel low pass filter engineered to isolate test equipment from external power sources while directing RF signals to a 50-ohm port. It supports conducted emissions measurements in compliance with regulatory standards, featuring a frequency range of 9 kHz to 30 MHz with VDE 0876 tolerance, network inductance options of 50 mH / 250 mH, and 50-ohm impedance. With a 10-amp current rating and 125 VAC 60 Hz capacity, it is equipped with a NEMA outlet and IEC-320 3-wire inlet for versatile connectivity.
Ideal for EMC testing environments, the Emco 3810/2 ensures reliable filtering performance and stable measurements for compliance and research applications.
Testwall can supply the used Emco 3810/2, fully tested. With expert support and global delivery, Testwall ensures high-performance instrumentation with unmatched reliability and service quality. Please contact us directly if you need calibration or repair of the Emco 3810/2.
