emtest
emtest V4780S2
Autotransformer with 40/70/80/100 Taps, 16A
0 – 4780 V peak Output Voltage Range
Up to 2 A peak Output Current
DC to 400 Hz Frequency Range
ISO 7637-2, ISO 16750-2, LV 124, LV 148 Applicable Standards
Pulses 1, 2a, 2b, 3a, 3b, 4, 5a, 5b and custom waveforms Pulse Types Supported
| Attribute | Value |
|---|---|
| Output Voltage Range | 0 – 4780 V peak |
| Output Current | Up to 2 A peak |
| Frequency Range | DC to 400 Hz |
| Applicable Standards | ISO 7637-2, ISO 16750-2, LV 124, LV 148 |
| Pulse Types Supported | Pulses 1, 2a, 2b, 3a, 3b, 4, 5a, 5b and custom waveforms |
| Rise Time | ≤ 1 µs (adjustable) |
| Internal Resistance | 0.5 Ω – 100 Ω (programmable) |
| Interface / Control | USB, GPIB, LAN (remote control via PC software) |
| Power Supply Input | 100 – 240 V AC, 50/60 Hz |
| Operating Temperature | 0 °C to +40 °C |
| Model | V4780S2 |
|---|
emtest V4780S2 V4780 S2 Auto TransformerThe emtest V4780S2 ( V4780 S2) tapped auto transformer can be used to simulate power supply failures as voltage interruptions. The basic standard EN/IEC 61000-4-11 Ed.2 specifies this phenomena. Voltage interruptions ( DIPS ):
Voltage interruptions will cause a reduction of the power supply voltage for a certain period of time. Four diffe test levels are required:Reduction by 100% to 0% of the nominal voltage Reduction by 60% to 40% of the nominal voltage Reduction by 30% to 70% of the nominal voltage Reduction by 20% to 80% of the nominal voltage The emtest V4780S2 is used in conjuction with the emtest UCS500N5 or the emtest NX5
Voltage interruptions will cause a reduction of the power supply voltage for a certain period of time. Four diffe test levels are required:
