California Instruments
California Instruments MX15-1PI
AC DC Power Supply System, 15kVA, 1 Phase
15 kVA Potencia de salida
Monofásico Número de fases
0 - 300 V CA Rango de tensión de salida
45 Hz - 500 Hz Frecuencia de salida
208 V / 220 V / 230 V trifásico Tensión de entrada
| Atributo | Valor |
|---|---|
| Potencia de salida | 15 kVA |
| Número de fases | Monofásico |
| Rango de tensión de salida | 0 - 300 V CA |
| Frecuencia de salida | 45 Hz - 500 Hz |
| Tensión de entrada | 208 V / 220 V / 230 V trifásico |
| Distorsión armónica total (THD) | Menos del 0,5% |
| Corriente de salida máxima | 50 A |
| Interfaz de programación | IEEE-488 (GPIB) y RS-232 |
| Regulación de tensión | ±0,1% de la tensión nominal |
| Dimensiones (An x Al x Pr) | 483 mm x 267 mm x 711 mm (19" x 10,5" x 28") |
California Instruments MX15-1PI Options:
- MX15-1PI - 208 - Configured for 208 V ±10% L-L, 4 wire input
- MX15-1PI - 230 - Configured for 230 V ±10% L-L, 4 wire input
- MX15-1PI - 400 - Configured for 400 V ±10% L-L, 4 wire input
- MX15-1PI - 480 - Configured for 480 V ±10% L-L, 4 wire input
- MX15-1PI - -150 - Configured for 150 V AC and 200 V DC output ranges
- MX15-1PI - -300 - Configured for 300 V AC and 400 V DC output ranges
- MX15-1PI - -R - Range change. Provides 150/200 & 300/400 AC/DC output ranges (Std. MX15)
- MX15-1PI - -411 - IEC 1000-4-11 test firmware
- MX15-1PI - -LF - Limits maximum frequency to 500 Hz
- MX15-1PI - -FC - Modifies output frequency control to ±0.25%
- MX15-1PI - -LAN - Ethernet Interface
- MX15-1PI - -HF - Increases maximum frequency to 905 Hz
- MX15-1PI - -413 - IEC 1000-4-13 Harmonics & Interharmonics test firmware
- MX15-1PI - -HV - Adds 400 V L-N AC-only output range
- MX15-1PI - -XV - Adds other AC-only output range (consult factory)
- MX15-1PI - -LKM - Clock/Lock Master
- MX15-1PI - -LKS - Clock/Lock Auxiliary
- MX15-1PI - -WHM - Watt-Hour Measurement option
- MX15-1PI - -SNK - Bidirectional auto source and sink mode; offers up to 100% power sink capability in AC mode of operation
- MX15-1PI - -SNK-DC - Sink DC current mode
- MX15-1PI - -ABD - ABD0100.1.8 Test Option
- MX15-1PI - -AMD - Airbus AMD24 Test
- MX15-1PI - -A350 - Airbus Test Software
- MX15-1PI - -B787 - Boeing 787 Test Software
- MX15-1PI - -160 - RTCA/DO-160D, DO-160E, and EUROCAE test firmware
- MX15-1PI - -704 - Mil Std 704 A-F test firmware/software
| Model | MX15-1PI |
|---|
California Instruments MX15-1PI AC Power Source The California Instruments MX15-1PI AC power source is much more than a programmable AC, DC or AC+DC power source. It also incorporates an advanced digital signal processor based data acquisition system that continuously monitors all AC source and load parameters. Common AC and DC measurement parameters are automatically provided by the data acquisition system and measurements include Frequency, Vrms, Irms, Ipk, Crest Factor, Real Power (Watts), Appa Power (VA) and Power Factor. Standard RS232C & USB IEEE-488 along with optional LAN remote control interfaces allow programming of all instrument functions from an external computer. The built-in output transient generation and read-back measurement capability of the MX15 power source offers the convenience of a powerful, and easy to use, integrated test system. The MX15 delivers up to 15 kVA of single phase output and has a powerful AC and DC transient generation system that allows complex sequences of voltage, frequency and waveshapes to be generated. The California Instruments MX15-1PI power source consists of multiple high power AC and DC power systems and eliminates the need for several additional pieces of test equipment, saving cost and space. Specifications of the California Instruments MX15-1PI AC Power Source includes: See Datasheet for Full Specifications
