Keysight (Agilent) N9010A-503 10 Hz to 3.6 GHz Spectrum Analyser (Signal Analyser)
| Attribute | Value |
|---|---|
| Frequency Range | 10 Hz to 3.6 GHz |
| Displayed Average Noise Level (DANL) | -163 dBm/Hz (with preamplifier enabled) |
| Phase Noise | -98 dBc/Hz at 10 kHz offset (1 GHz carrier) |
| Resolution Bandwidth (RBW) | 1 Hz to 3 MHz (10% steps), plus 4, 5, 6, 8 MHz |
| Total Amplitude Accuracy | ±0.19 dB (typical) |
| Third-Order Intercept (TOI) | +15 dBm (typical, at 50 MHz) |
| Input Attenuator Range | 0 to 70 dB in 2 dB steps |
| Maximum Input Power | +30 dBm (1 W) average, ±50 VDC |
| Sweep Time | 1 ms to 6000 s (span > 10 Hz), 1 µs to 6000 s (zero span) |
| Spurious-Free Dynamic Range (SFDR) | 78 dB (typical) |
Keysight (Agilent) N9010A-503 10 Hz to 3.6 GHz Spectrum Analyser (Signal Analyser) Options:
- N9010A-503 - 503 - Frequency range 10 Hz to 3.6 GHz (DC coupled) / 10 MHz to 3.6 GHz (AC coupled)
- N9010A-503 - 507 - Frequency range 10 Hz to 7 GHz (DC coupled) / 10 MHz to 7 GHz (AC coupled)
- N9010A-503 - 513 - Frequency range 10 Hz to 13.6 GHz (DC coupled) / 10 MHz to 13.6 GHz (AC coupled)
- N9010A-503 - 526 - Frequency range 10 Hz to 26.5 GHz (DC coupled) / 10 MHz to 26.5 GHz (AC coupled)
- N9010A-503 - 532 - Frequency range 10 Hz to 32 GHz (DC coupled)
- N9010A-503 - 544 - Frequency range 10 Hz to 44 GHz (DC coupled)
- N9010A-503 - PFR - Precision frequency reference
- N9010A-503 - FSA - Fine step attenuator (0 to 60 dB in 2 dB steps)
- N9010A-503 - EA3 - Electronic attenuator, 10 Hz to 3.6 GHz, 0 to 24 dB in 1 dB steps
- N9010A-503 - P03 - Preamplifier, 100 kHz to 3.6 GHz
- N9010A-503 - P07 - Preamplifier, 100 kHz to 7 GHz
- N9010A-503 - P13 - Preamplifier, 100 kHz to 13.6 GHz
- N9010A-503 - P26 - Preamplifier, 100 kHz to 26.5 GHz
- N9010A-503 - P32 - Preamplifier, 100 kHz to 32 GHz
- N9010A-503 - P44 - Preamplifier, 100 kHz to 44 GHz
- N9010A-503 - NFE - Noise floor extension
- N9010A-503 - B25 - 25 MHz analysis bandwidth (standard)
- N9010A-503 - B40 - 40 MHz analysis bandwidth
- N9010A-503 - MPB - Microwave preselector bypass (3.6 GHz to maximum frequency)
- N9010A-503 - EMC - EMC bandwidth (CISPR and MIL STD 461E compliant bandwidths)
- N9010A-503 - CR3 - Wideband IF output
- N9010A-503 - CRP - Programmable IF output (10 to 75 MHz user selectable center frequency)
- N9010A-503 - EXM - External mixing (available only with Option 532 or 544)
- N9010A-503 - PC4 - High-performance processor (increased measurement speed)
- N9010A-503 - DP2 - Digital processor upgrade (16-bit ADC, 100 MSa/s sample rate)
- N9010A-503 - EP3 - Enhanced performance level 3
- N9010A-503 - EP5 - Enhanced performance level 5
| Model | N9010A-503 |
|---|
The Keysight (Agilent) N9010A-503 Spectrum Analyzer is an advanced N9000A series model designed for high-demand ATE environments, offering 0–150 V and 0–60 A output with up to 9 kW power. It delivers superior dynamic response, clean low-noise power, and includes built-in safeguards for critical testing applications.
Its compact form factor and remote SCPI control make it ideal for integrated testing systems requiring high-current sourcing with robust performance and safety.
Testwall can supply the used Keysight (Agilent) N9010A-503 Spectrum Analyzer, fully tested. With expert support and global delivery, Testwall ensures high-performance instrumentation with unmatched reliability and service quality. Please contact us directly if you need calibration or repair of the Keysight (Agilent) N9010A-503 Spectrum Analyzer.
