Keysight (Agilent)
Keysight (Agilent) 11960A
2.0 GHz to 18.0 GHz Frequency Range
Ridged Horn Antenna Antenna Type
Linear Polarization
10 dBi typical Nominal Gain
2.5:1 maximum VSWR
| Attribute | Value |
|---|---|
| Frequency Range | 2.0 GHz to 18.0 GHz |
| Antenna Type | Ridged Horn Antenna |
| Polarization | Linear |
| Nominal Gain | 10 dBi typical |
| VSWR | 2.5:1 maximum |
| Connector Type | Type-N Female |
| Input Power (Maximum) | 2 W CW |
| Impedance | 50 Ohms |
| Dimensions (L x W x H) | Approximately 310 mm x 145 mm x 95 mm |
| Weight | Approximately 0.8 kg |
Keysight (Agilent) 11960A Options:
- 11500A - 11500A - Six foot RG-214U Cable with Type-N Connector
- 11500F - 11500F - 150 cm Cable (APC 3.5 Male Connectors)
- 11940A - 11940A - Close Field Probe 30 MHz to 1 GHz
- 11941A - 11941A - Close Field Probe 9 KHz to 30 MHz
- 11945A - 11945A - Close Field Probe Set
- 11945A - E51 - Adds 8447F Option H64 dual preamplifier, a 36 inch Type-N cable and a carrying bag
- 11947A - 11947A - Transient Limiter
- 11955A - 11955A - Biconical Antenna
- 11956A - 11956A - Log Periodic Antenna
- 11961A - 11961A - EMI Measurement Software
- 11966A - 11966A - Active Magnetic Loop Antenna
- 11966A - 220 - Replaces standard 120 VAC/60 Hz battery charger with 220 VAC/50 Hz unit
- 11966A - K12 - Passive Loop Set
- 11966A - K24 - Biconical Antenna 20 MHz to 300 MHz (2000 Watts)
- 11966A - K30 - Passive Rod Antenna
- 11966A - K38 - Biconical Antenna 30 MHz to 300 MHz (300 Watts)
- 11966A - K40 - Royce Field Site Source
- 11966A - K47 - Five Meter Cable (APC 3.5 Male Connector)
- 11966A - K48 - Ten Meter Cable (APC 3.5 Male Connector)
- 11966B - 11966B - Active Monopole Antenna
- 11966B - 220 - Replaces standard 120 VAC/60 Hz battery charger with 220 VAC/50 Hz unit
- 11966C - 11966C - Biconical Antenna 30 MHz to 300 MHz
- 11966D - 11966D - Log-Periodic Antenna 200 MHz to 1 GHz
- 11966E - 11966E - Double-Ridged Waveguide Horn Antenna 1 GHz to 18 GHz
- 11966F - 11966F - Conical Log Spiral Antenna 200 MHz to 1 GHz
- 11966G - 11966G - Conical Log Spiral Antenna 1 GHz to 10 GHz
- 11966H - 11966H - Dipole Antenna Set 28 MHz to 1000 MHz
- 11966I - 11966I - Horn Antenna 200 MHz to 2 GHz
- 11966J - 11966J - Horn Antenna 18 GHz to 40 GHz
- 11966K - 11966K - Magnetic Field Pickup Coil 20 Hz to 50 kHz
- 11966L - 11966L - Coaxial Cable 10 Meter Type-N
- 11966M - 11966M - Coaxial Cable 10 Meter BNC
- 11966N - 11966N - Log Periodic Antenna 200 MHz to 5 GHz
- 11966P - 11966P - Broadband Antenna
- 11967A - 11967A - Current Probe 15 kHz to 50 MHz
- 11967A - K05 - Absorbing Clamp
- 11967A - K06 - Cavity Rejection Networks
- 11967A - K23 - Bridged-T Rejection Networks
- 11967B - 11967B - Current Probe 20 Hz to 2 MHz
- 11967D - 11967D - 10 Amp Line Impedance Stabilization Network
- 11967D - 001 - SCHUKO outlet
- 11967D - 002 - British outlet
- 11967E - 11967E - 25 Amp Line Impedance Stabilization Network
- 11967E - 001 - SCHUKO outlet
- 11967E - 002 - British outlet
- 11967E - 003 - Australian outlet
- 11968A - K07 - Shielded Room Kit
- 11968B - 11968B - Manual Antenna Positioning Mast
- 11968C - 11968C - Antenna Tripod
- 11968E - 11968E - Manual Equipment Test Turntable
- 8447F - H64 - Dual Preamplifier 0.1 to 1300 MHz
- 8449B - 8449B - Microwave Preamplifier 1 GHz to 26.5 GHz
- 85650A - 85650A - Quasi-Peak Adapter
- 85685A - 85685A - RF Preselector
- 85876B - 85876B - Commercial Radiated EMI Software
- 85878A - 85878A - EMI Report Generator
- 0160-6683 - 0160-6683 - 10 µF Capacitor
- 8120-1840 - 8120-1840 - 122 Centimeter Coaxial Cable
- 11729-60014 - 11729-60014 - Low Noise Preamplifier
| Model | 11960A |
|---|
The Keysight (Agilent) 11960A is a microwave mixer for frequency conversion applications in RF and microwave systems. Operating from 2 GHz to 18 GHz, it supports IF outputs between 10 MHz and 500 MHz with a conversion loss of 7–10 dB. It features a 50 Ω impedance and high-precision coaxial connectors. The required LO drive level is typically +10 to +13 dBm.
Ideal for spectrum analysis, signal monitoring, and R&D, it integrates with Keysight’s analyzers and generators for reliable performance.
Testwall can supply the used Keysight (Agilent) 11960A, fully tested. With expert support and global delivery, Testwall ensures high-performance instrumentation with unmatched reliability and service quality. Please contact us directly if you need calibration or repair of the Keysight (Agilent) 11960A.
