Rohde & Schwarz
Rohde & Schwarz FSVA4
10 Hz to 4 Ghz Spectrum Analyser (Signal Analyser)
10 Hz to 4 GHz Frequency Range
-165 dBm (typical, with preamplifier) Display Average Noise Level (DANL)
-105 dBc/Hz at 10 kHz offset (at 1 GHz carrier) Phase Noise
1 Hz to 10 MHz Resolution Bandwidth (RBW)
+30 dBm (with mechanical attenuator) Maximum Input Power
| Attribute | Value |
|---|---|
| Frequency Range | 10 Hz to 4 GHz |
| Display Average Noise Level (DANL) | -165 dBm (typical, with preamplifier) |
| Phase Noise | -105 dBc/Hz at 10 kHz offset (at 1 GHz carrier) |
| Resolution Bandwidth (RBW) | 1 Hz to 10 MHz |
| Maximum Input Power | +30 dBm (with mechanical attenuator) |
| Input Impedance | 50 Ohm |
| Dynamic Range | Up to 110 dB |
| Analysis Bandwidth | Up to 40 MHz (real-time analysis bandwidth available) |
| Third-Order Intercept Point (TOI) | +20 dBm (typical) |
| Sweep Time | 1 ms to 16000 s (frequency sweep mode) |
Rohde & Schwarz FSVA4 Options:
- FSVA4 - FSV-B1 - Ruggedized Housing
- FSVA4 - FSV-B3 - Audio Demodulator
- FSVA4 - FSV-B4 - OCXO Reference Frequency
- FSVA4 - FSV-B4 - OCXO Extended Frequency Stability
- FSVA4 - FSV-B5 - Additional Interfaces (IF out, video out, AUX port, trigger out, 2 × USB)
- FSVA4 - FSV-B9 - Tracking Generator (100 kHz to 7 GHz)
- FSVA4 - FSV-B10 - External Generator Control
- FSVA4 - FSV-B14 - Ultra-High Precision Frequency Reference
- FSVA4 - FSV-B17 - Digital Baseband Interface
- FSVA4 - FSV-B18 - Solid-State Drive (removable hard drive)
- FSVA4 - FSV-B22 - RF Preamplifier (9 kHz to 7 GHz)
- FSVA4 - FSV-B25 - Electronic Attenuator, 1 dB steps
- FSVA4 - FSV-B30 - DC Power Supply for 12 V Supply Voltage
- FSVA4 - FSV-B32 - Lithium-Ion Battery Pack
- FSVA4 - FS-B33 - USB Mass Memory Write Protection
- FSVA4 - FSV-B34 - Lithium-Ion Battery Charger
- FSVA4 - FSVA-B40 - 40 MHz Analysis Bandwidth
- FSVA4 - FSV-B160 - 160 MHz Analysis Bandwidth
- FSVA4 - FSV-K7 - Analog Modulation Analysis for AM, FM, φM
- FSVA4 - FSV-K8 - Bluetooth/EDR Measurements
- FSVA4 - FSV-K9 - Power Sensor Measurement with R&S NRP Power Sensors
- FSVA4 - FSV-K10 - Analysis of GSM, EDGE and EDGE Evolution Signals
- FSVA4 - FSV-K14 - Spectrogram Measurements
- FSVA4 - FSV-K30 - Noise Figure and Gain Measurements
- FSVA4 - FSV-K40 - Phase Noise Measurement Application
- FSVA4 - FSV-K54 - EMI Measurement Application
- FSVA4 - FSV-K70 - Vector Signal Analysis
- FSVA4 - FSV-K72 - Analysis of 3GPP FDD Base Station Signals incl. HSPA+
- FSVA4 - FSV-K73 - 3GPP FDD UE Analysis incl. HSPA+
- FSVA4 - FSV-K76 - 3GPP TD-SCDMA BTS Measurements
- FSVA4 - FSV-K77 - TD-SCDMA UE Measurements
- FSVA4 - FSV-K82 - Analysis of CDMA2000 Base Station Signals
- FSVA4 - FSV-K83 - CDMA2000 MS Measurements
- FSVA4 - FSV-K84 - Analysis of 1xEV-DO Base Station Signals
- FSVA4 - FSV-K85 - 1xEV-DO MS Measurements
- FSVA4 - FSV-K91 - Analysis of WLAN 802.11a, b, g, j Signals
- FSVA4 - FSV-K91AC - WLAN 802.11ac Measurement Application
- FSVA4 - FSV-K91N - Extension of R&S FSV-K91 to 802.11n
- FSVA4 - FSV-K91P - WLAN 802.11p Measurement Application
- FSVA4 - FSV-K100 - Analysis of EUTRA/LTE FDD Downlink Signals
- FSVA4 - FSV-K101 - Analysis of EUTRA/LTE FDD Uplink Signals
- FSVA4 - FSV-K102 - EUTRA/LTE Downlink MIMO Measurements
- FSVA4 - FSV-K103 - EUTRA/LTE Uplink MIMO, PC software for R&S FSV
- FSVA4 - FSV-K104 - Analysis of EUTRA/LTE TDD Downlink Signals
- FSVA4 - FSV-K105 - Analysis of EUTRA/LTE TDD Uplink Signals
| Model | FSVA4 |
|---|
The Rohde & Schwarz FSVA4 signal and spectrum analyzer offers a frequency range from 10 Hz to 44 GHz, 1 GHz internal analysis bandwidth, -121 dBc/Hz phase noise, and >160 dB dynamic range. With RTSA up to 600 MHz, a 12.1” multi-touch screen, USB/LAN/HDMI, and advanced vector signal analysis, it's designed for high-speed, accurate RF measurements.
Suitable for 5G, radar, and broadband communication analysis, its real-time capabilities and flexibility make it ideal for development and production.
Testwall can supply the used Rohde & Schwarz FSVA4, fully tested. With expert support and global delivery, Testwall ensures high-performance instrumentation with unmatched reliability and service quality. Please contact us directly if you need calibration or repair of the Rohde & Schwarz FSVA4.
