Rohde & Schwarz FSP30
| Attribute | Value |
|---|---|
| Frequency Range | 9 kHz to 30 GHz |
| Resolution Bandwidth | 10 Hz to 10 MHz |
| Display Average Noise Level | -155 dBm (typ.) at 1 GHz, 10 Hz RBW |
| Phase Noise | -113 dBc/Hz at 10 kHz offset from 1 GHz carrier |
| Total Amplitude Accuracy | < 0.5 dB (typ.) at 20°C to 30°C |
| Maximum Input Level | +30 dBm (1 W) continuous, DC 50 V max |
| Input Impedance | 50 Ohm (N-type female connector) |
| Dynamic Range | > 70 dB (third-order intercept point +15 dBm typ.) |
| Video Bandwidth | 1 Hz to 10 MHz |
| Power Supply | 100 V to 240 V AC, 50 Hz to 60 Hz, max. 150 W |
Rohde & Schwarz FSP30 Options:
- FSP30 - B1 - Cabinet for portable use
- FSP30 - B3 - AM/FM audio demodulator
- FSP30 - B4 - OCXO reference frequency
- FSP30 - B6 - TV trigger/RF power trigger
- FSP30 - B9 - Tracking generator
- FSP30 - B10 - External generator control
- FSP30 - B15 - Pulse calibrator
- FSP30 - B16 - LAN interface
- FSP30 - B20 - Extended environmental specification
- FSP30 - B21 - LO/IF ports for external mixers
- FSP30 - B25 - Electronic attenuator
- FSP30 - B28 - Trigger port
- FSP30 - B29 - Frequency range extension 20 Hz
- FSP30 - B30 - DC power supply
- FSP30 - B31/B32 - Battery pack/spare battery pack
- FSP30 - B70 - Demodulation hardware memory extension
- FSP30 - FS-K4 - Phase noise measurements (Windows software)
- FSP30 - FS-K5 - Modulation and spectrum measurements on GSM/EDGE base station and mobile signals
- FSP30 - FS-K7 - AM/FM/φM measurement demodulator for general applications
- FSP30 - FS-K8 - Bluetooth transmitter measurements
- FSP30 - FS-K9 - Power sensor measurements
- FSP30 - FS-K72 - Modulation and code domain power measurements in accordance with 3GPP TS 24.141 on base station signals (Node B)
- FSP30 - FS-K73 - Modulation and code domain power measurements in accordance with 3GPP TS 25.121 on mobile station signals (UE)
- FSP30 - FS-K74 - HSDPA extension for R&S FS-K72
- FSP30 - FS-K76 - Modulation and code domain power measurements on TD-SCDMA base station signals
- FSP30 - FS-K77 - Modulation and code domain power measurements on TD-SCDMA mobile station signals (UE)
- FSP30 - FS-K82 - Modulation and code domain power measurements in accordance with CDMA2000/1xEV-DV on base station signals
- FSP30 - FS-K83 - Modulation and code domain power measurements on CDMA2000/1xEV-DV mobile station signals (UE)
- FSP30 - FS-K84 - Modulation and code domain power measurements on 1xEV-DO base station signals
- FSP30 - FS-K85 - Modulation and code domain power measurements on 1xEV-DO mobile station signals (UE)
- FSP30 - FSP-K90 - WLAN 802.11a Application Firmware
- FSP30 - FS-K30 - Noise figure measurements (application firmware), remote-controllable
| Model | FSP30 |
|---|
The Rohde & Schwarz FSP30 Spectrum Analyzer covers a frequency range from 9 kHz to 3 GHz, featuring digital resolution bandwidths from 1 Hz to 10 MHz and exceptional phase noise at -113 dB (1 Hz) at 10 kHz. Its fast sweep time and 100 measurements per second performance make it ideal for rigorous measurement tasks in development and testing environments.
Its 100 kHz resolution bandwidth ensures high selectivity and precision, with a deviation of just 3%, ideal for adjacent channel power measurements. The RMS detector enhances accuracy for complex signals like CDMA.
Testwall can supply the used Rohde & Schwarz FSP30, fully tested. With expert support and global delivery, Testwall ensures high-performance instrumentation with unmatched reliability and service quality. Please contact us directly if you need calibration or repair of the Rohde & Schwarz FSP30.
