Rohde & Schwarz ZNB8
| Attribute | Value |
|---|---|
| Frequency Range | 9 kHz to 8.5 GHz |
| Number of Ports | 2 or 4 ports |
| Dynamic Range | Up to 140 dB |
| Output Power | -40 dBm to +3 dBm (typical) |
| Measurement Speed | Up to 1.5 ms per point (typical) |
| Trace Noise | <0.004 dB RMS at 10 Hz IF bandwidth |
| Port Impedance | 50 Ohm |
| Connector Type | N-type female (50 Ohm) |
| Display | 12.1-inch XGA touchscreen display |
| Interface/Connectivity | USB, LAN (Ethernet), GPIB (optional) |
Rohde & Schwarz ZNB8 Options:
- ZNB8 - B22 - Extended Power Range for Two-Port R&S ZNB8
- ZNB8 - B24 - Extended Power Range for Four-Port R&S ZNB8
- ZNB8 - B31 - Receiver Step Attenuator, Port 1, for R&S ZNB8
- ZNB8 - B32 - Receiver Step Attenuator, Port 2, for R&S ZNB8
- ZNB8 - B33 - Receiver Step Attenuator, Port 3, for R&S ZNB8
- ZNB8 - B34 - Receiver Step Attenuator, Port 4, for R&S ZNB8
- ZNB8 - B52 - Extended Dynamic Range for Two-Port R&S ZNB8
- ZNB8 - B54 - Extended Dynamic Range for Four-Port R&S ZNB8
- ZNB - B1 - Bias Tees for R&S ZNB8 with Two Ports
- ZNB - B1 - Bias Tees for R&S ZNB8 with Four Ports
- ZNB - B2 - Second Internal Generator for Four-Port R&S ZNB8
- ZNB - B4 - Precision Frequency Reference (OCXO)
- ZNB - B10 - GPIB Interface
- ZNB - B12 - Device Control
- ZN - B14 - Handler I/O
- ZN - B15 - RFFE GPIO Interface
- ZNB - B19 - Additional Removable Hard Disk, 32 bit
- ZNB - B19 - Additional Removable Hard Disk, 64 bit
- ZNB - B81 - DC Inputs
- ZNB - K2 - Time Domain Analysis
- ZNB - K4 - Frequency Conversion
- ZNB - K14 - Intermodulation Measurements
- ZNB - K17 - 10 MHz Receiver Bandwidth
- ZNB - K19 - 1 mHz Frequency Resolution
| Model | ZNB8 |
|---|
The Rohde & Schwarz ZNB8 RF Network Analyzer covers frequencies from 9 kHz to 8.5 GHz, offering a wide dynamic range up to 140 dB and fast sweep times of 4 ms for 401 points. It includes a 12.1″ high-resolution touchscreen, 1 Hz to 10 MHz IF bandwidths, and 98 dB power sweep range.
With high temperature stability of 0.01 dB/°C, manual and automatic calibration, and two or four test port options, it provides flexible configuration and accurate measurements for various RF applications.
Testwall can supply the used Rohde & Schwarz ZNB8, fully tested. With expert support and global delivery, Testwall ensures high-performance instrumentation with unmatched reliability and service quality. Please contact us directly if you need calibration or repair of the Rohde & Schwarz ZNB8.
