Teseq (Schaffner)
Teseq (Schaffner) NSG438
ESD Simulator, 30 kV
Up to 4 kV peak Output Voltage Range
Up to 2 kA peak Output Current Range
Combination Wave (1.2/50 µs voltage, 8/20 µs current) Pulse Waveform
IEC 61000-4-5, ANSI/IEEE C62.41 Standards Compliance
2 Ω Source Impedance
| Attribute | Value |
|---|---|
| Output Voltage Range | Up to 4 kV peak |
| Output Current Range | Up to 2 kA peak |
| Pulse Waveform | Combination Wave (1.2/50 µs voltage, 8/20 µs current) |
| Standards Compliance | IEC 61000-4-5, ANSI/IEEE C62.41 |
| Source Impedance | 2 Ω |
| Coupling Modes | Line-to-Line and Line-to-Earth |
| Mains Voltage Input | 115/230 V AC, 50/60 Hz |
| Pulse Repetition Rate | 1 pulse per minute (minimum) |
| Operating Temperature Range | 0°C to 40°C (32°F to 104°F) |
| Interface / Control | Front panel controls with digital display and IEEE-488 / RS-232 remote interface |
| Model | NSG438 |
|---|
The NSG 438 ESD Simulator supports over 20 discharge networks, meeting global and automotive ESD standards. It offers precise control with adjustable polarity, repetition, and breakdown detection up to 30kV.
Ideal for IEC/EN 61000-4-2 and ISO 10605 with RC value display and multilingual touch interface.
Testwall can supply the used NSG 438, fully tested. With expert support and global delivery, Testwall ensures high-performance instrumentation with unmatched reliability and service quality. Please contact us directly if you need calibration or repair of the NSG 438.
