Keysight (Agilent) 8515A
| Attribute | Value |
|---|---|
| Frequency Range | 45 MHz to 26.5 GHz |
| Connector Type | APC-3.5 (3.5 mm) |
| Number of Ports | 2-Port S-Parameter Test Set |
| Compatible Analyzer | HP/Agilent 8510 Series Network Analyzers |
| Characteristic Impedance | 50 Ohm |
| Dynamic Range | Up to 100 dB |
| Maximum Input Power | +26 dBm |
| Test Port Output Power | -10 dBm typical |
| S-Parameters Measured | S11, S21, S12, S22 |
| Operating Temperature | 0°C to 55°C |
| Model | 8515A |
|---|
The Keysight (Agilent) 8515A S-Parameter Test Set supports broadband coaxial measurements from 45 MHz to 26.5 GHz, integrating with the 8510C Network Analyzer. It offers separate reference channels per incident port and a built-in electronic switch, plus external DC biasing and dual 90 dB step attenuators for precise signal control.
Ideal for active and passive device testing, the 8515A enhances measurement accuracy with isolated reference paths and flexible port-level adjustments.
Testwall can supply the used Keysight (Agilent) 8515A S-Parameter Test Set, fully tested. With expert support and global delivery, Testwall ensures high-performance instrumentation with unmatched reliability and service quality. Please contact us directly if you need calibration or repair of the Keysight (Agilent) 8515A S-Parameter Test Set.
