Keysight (Agilent) E8362C
| Attribute | Value |
|---|---|
| Frequency Range | 10 MHz to 20 GHz |
| Number of Ports | 2 |
| Dynamic Range | Up to 132 dB |
| Output Power Range | -85 dBm to +20 dBm |
| Trace Noise | 0.004 dB RMS at 10 Hz IF bandwidth |
| Test Port Connector Type | 2.4 mm (female) |
| Measurement Parameters | S-parameters, impedance, admittance, group delay, phase, and more |
| IF Bandwidth | 1 Hz to 40 kHz |
| Number of Data Points | 1 to 32,001 points per sweep |
| Power Supply | 100–240 VAC, 50/60 Hz, 350 W maximum |
Keysight (Agilent) E8362C Options:
Options available for the Keysight (Agilent) PNA series microwave network analyzers (E8361/E8362/E8363/E8364). Installed options vary from unit to unit – ask us for the exact configuration of the instrument you are interested in.
- E8362C - 010 - Time-domain measurements
- E8362C - 014 - Configurable test set (front-panel access loops)
- E8362C - UNL - Extended power range and bias-tees
- E8362C - 016 - Receiver attenuators
- E8362C - 080 - Frequency-offset mode
- E8362C - 081 - Reference receiver switch
- E8362C - 082 - Scalar-calibrated converter measurements
- E8362C - 083 - Frequency converter application with vector-calibrated measurements
- E8362C - H08 - Pulsed-RF measurement capability
- E8362C - H11 - IF access
- E8362C - 1CM - Rack mount kit
- E8362C - 1CP - Rack mount kit with handles
The Keysight (Agilent) E8362C offers a broad frequency range from 10 MHz to 20 GHz, 123 dB dynamic range, and an exceptional trace noise level of <0.006 dB. It provides fast measurement speeds of <26 µs/point across 32 channels and 20,001 points. It enables precise TRL/LRM calibration and supports on-wafer, in-fixture, waveguide, and antenna measurements. Mixer conversion loss, return loss, isolation, absolute group delay, amplifier gain compression, harmonic, IMD, and pulsed-RF analysis are also included.
This analyzer is ideal for general-purpose network analysis with customizable options for specific needs such as multiport or pulsed-RF testing.
Testwall can supply the used Keysight (Agilent) E8362C, fully tested. With expert support and global delivery, Testwall ensures high-performance instrumentation with unmatched reliability and service quality. Please contact us directly if you need calibration or repair of the Keysight (Agilent) E8362C.
