Rohde & Schwarz FSMR43
| Attribute | Value |
|---|---|
| Frequency Range | 20 Hz – 43 GHz |
| Displayed Average Noise Level (DANL) | -170 dBm (1 Hz bandwidth, typical) |
| Phase Noise | -130 dBc/Hz at 10 kHz offset (1 GHz carrier, typical) |
| Measurement Uncertainty | ±0.3 dB (typical, absolute level accuracy) |
| Dynamic Range | Up to 110 dB |
| Resolution Bandwidth (RBW) | 1 Hz – 10 MHz |
| Input Impedance | 50 Ω |
| Maximum Input Power (RF Input) | +30 dBm (1 W) |
| Third-Order Intercept Point (TOI) | +20 dBm (typical) |
| Interface / Connectivity | USB, LAN (LXI), GPIB (optional), IEC/IEEE bus |
Rohde & Schwarz FSMR43 Options:
- FSMR43 - FSMR-B2 - YIG Preselection, 3.6 GHz to 26.5 GHz
- FSMR43 - FSU-B4 - Low-Aging OCXO
- FSMR43 - FSU-B9 - Tracking Generator, 100 kHz to 3.6 GHz
- FSMR43 - FSU-B12 - Attenuator for Tracking Generator
- FSMR43 - FSMR-B18 - Removable Hard Disk
- FSMR43 - FSMR-B19 - Second Hard Disk (requires FSMR-B18)
- FSMR43 - FSMR-B73 - Vector Signal Analyzer
- FSMR43 - FSU-B24 - 20 dB RF Preamplifier and Electronic Attenuator, 100 kHz to 3.6 GHz (requires FSU-B25)
- FSMR43 - FSU-B25 - 20 dB RF Preamplifier and Electronic Attenuator, 100 kHz to 3.6 GHz
- FSMR43 - FSMR-Z2 - Attenuation Calibration Kit
- FSMR43 - FS-K15 - VOR/ILS Measurement Demodulator
- FSMR43 - FS-K30 - Application Firmware for Noise Figure and Gain Measurements
- FSMR43 - FS-K40 - Application Firmware for Phase Noise Measurement
- FSMR43 - FS-K5 - GSM/EDGE Application Firmware
- FSMR43 - FS-K72 - 3GPP BTS/NodeB FDD Application Firmware
- FSMR43 - FS-K73 - 3GPP UE FDD Application Firmware
- FSMR43 - FS-K74 - 3GPP HSDPA BTS Application Firmware (requires FS-K72)
- FSMR43 - FS-K76 - 3GPP TD-SCDMA BTS Application Firmware
- FSMR43 - FS-K77 - 3GPP TD-SCDMA UE Application Firmware
- FSMR43 - FS-K82 - CDMA2000 BTS Application Firmware
- FSMR43 - FS-K83 - CDMA2000 MS Application Firmware (incl. 1xEV-DV)
- FSMR43 - FS-K84 - CDMA2000 1xEV-DO BTS Application Firmware
- FSMR43 - FS-K85 - CDMA2000 1xEV-DO MS Application Firmware
| Model | FSMR43 |
|---|
The Rohde & Schwarz FSMR43 Measuring Receiver supports 10 Hz to 43.5 GHz frequency range, integrating power meter, spectrum and modulation analyzers, and phase noise tester in one unit. With phase noise performance down to -140 dBc/Hz and dynamic range over 100 dB, it's ideal for calibrating signal generators and RF components in critical metrology applications.
Designed for aerospace, defense, and telecom industries, it ensures ±0.05 dB level accuracy, automation capabilities, and seamless operation with intuitive touchscreen UI.
Testwall can supply the used Rohde & Schwarz FSMR43, fully tested. With expert support and global delivery, Testwall ensures high-performance instrumentation with unmatched reliability and service quality. Please contact us directly if you need calibration or repair of the Rohde & Schwarz FSMR43.
