Keysight (Agilent) 8484A
| Attribute | Value |
|---|---|
| Frequency Range | 10 MHz to 18 GHz |
| Power Range | -70 dBm to -20 dBm (100 pW to 10 µW) |
| Connector Type | APC-7 (7mm) |
| SWR (Standing Wave Ratio) | 1.15 (10 MHz to 2 GHz), 1.25 (2 GHz to 12.4 GHz), 1.35 (12.4 GHz to 18 GHz) |
| Sensor Type | Diode Power Sensor |
| Maximum Input Power | 200 mW (average), 15 W (peak) |
| Calibration Factor Frequency Points | Individually calibrated calibration factors provided |
| Compatible Power Meters | Keysight 435B, 436A, 437B, 438A, EPM-441A, EPM-442A, EPM series |
| Operating Temperature Range | 0°C to 55°C |
| Impedance | 50 Ohms |
| Model | 8484A |
|---|
The Keysight (Agilent) 8484A High Sensitivity Power Sensor precisely measures power levels from 0.1 nW to 10 µW within a frequency range of 10 MHz to 18 GHz. It features noise and drift performance reduced to less than 5% of full scale on the 300 pW range, achieving only 15 pW when used with the 435B power meter, and even better results with the 436A, 437B, and 438A models. Nominal impedance is 50 ohms.
Ideal for low-power signal detection and accurate RF measurements, the 8484A is compatible with various Keysight meters for enhanced precision.
Testwall can supply the used Keysight (Agilent) 8484A, fully tested. With expert support and global delivery, Testwall ensures high-performance instrumentation with unmatched reliability and service quality. Please contact us directly if you need calibration or repair of the Keysight (Agilent) 8484A.
